OK so the message was blocked for length, here is ~ 450 lines, after this it basically repeats with new ID's several (hundred) times.
FreeRADIUS Version 2.0.4, for host i486-pc-linux-gnu, built on Jan 19 2010 at 01:20:58 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including configuration file /etc/freeradius/snmp.conf including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" user = "freerad" group = "freerad" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.1.1 { require_message_authenticator = no secret = "secret123" shortname = "AP" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover nostrip } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = yes input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } main { snmp = no smux_password = "" snmp_write_access = no } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.1.1 port 3084, id=0, length=145 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x4596866c49ddc4b0e336c18ead553616 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: Looking up realm "example.com" for User-Name = " u...@example.com" rlm_realm: Found realm "example.com" rlm_realm: Adding Realm = "example.com" rlm_realm: Proxying request from user user to realm example.com rlm_realm: Preparing to proxy authentication request to realm " example.com" ++[suffix] returns updated rlm_eap: Request is supposed to be proxied to Realm example.com. Not doing EAP. ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Sending Access-Request of id 212 to 127.0.0.1 port 1812 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Proxying request 0 to home server 127.0.0.1 port 1812 Sending Access-Request of id 212 to 127.0.0.1 port 1812 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 1814, id=212, length=148 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x4791db4e63523707dc30aa86b4eb5d10 Proxy-State = 0x30 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: Looking up realm "example.com" for User-Name = " u...@example.com" rlm_realm: Found realm "example.com" rlm_realm: Adding Realm = "example.com" rlm_realm: Proxying request from user user to realm example.com rlm_realm: Preparing to proxy authentication request to realm " example.com" ++[suffix] returns updated rlm_eap: Request is supposed to be proxied to Realm example.com. Not doing EAP. ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Sending Access-Request of id 180 to 127.0.0.1 port 1812 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Proxy-State = 0x323132 Proxying request 1 to home server 127.0.0.1 port 1812 Sending Access-Request of id 180 to 127.0.0.1 port 1812 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Proxy-State = 0x323132 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 1814, id=180, length=153 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0xd1cc78e5572f18ab760558efbf7db805 Proxy-State = 0x30 Proxy-State = 0x323132 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: Looking up realm "example.com" for User-Name = " u...@example.com" rlm_realm: Found realm "example.com" rlm_realm: Adding Realm = "example.com" rlm_realm: Proxying request from user user to realm example.com rlm_realm: Preparing to proxy authentication request to realm " example.com" ++[suffix] returns updated rlm_eap: Request is supposed to be proxied to Realm example.com. Not doing EAP. ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Sending Access-Request of id 25 to 127.0.0.1 port 1812 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Proxy-State = 0x323132 Proxy-State = 0x313830 Proxying request 2 to home server 127.0.0.1 port 1812 Sending Access-Request of id 25 to 127.0.0.1 port 1812 User-Name = "u...@example.com" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "0016b6e2cc20" Calling-Station-Id = "00904b1f9671" NAS-Identifier = "0016b6e2cc20" NAS-Port = 56 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000150175736572406578616d706c652e636f6d Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x30 Proxy-State = 0x323132 Proxy-State = 0x313830 Going to the next request Waking up in 0.9 seconds. On Tue, Jan 19, 2010 at 9:20 AM, Alan DeKok <al...@deployingradius.com>wrote: > Huckle Berry wrote: > > For all I know, the top of the output could be 10,000 (or more) lines > > up. Funny thing about endless loops, they tend to go on for quite a > > while. > > Would re-directing the output to a file work? > > > Like I said before though, I am running the default config (except for > > the nostrip line) so if authhost isn't set by default, I didn't add it. > > Try using a user from a realm *other* than example.com. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html