The reason i had those configs was because they were outlined as steps to reject authentication by default in the guide i was using. http://wiki.freeradius.org/SQL_Huntgroup_HOWTO
"Note: If you want to reject authentication by default then edit the raddb/users file and add this: DEFAULT Auth-Type := Reject Then add Auth-Type Accept with := as op in radgroupcheck for each group" I've commented out the DEFAULT Auth-Type := Reject in the users file and removed the Auth-Type := Accept from the radgroupcheck table and the server no longer accepts a blank password. Guide is incorrect or needs updating? Thanks for the help guys. On Thu, Jan 21, 2010 at 6:58 PM, Bjørn Mork <bj...@mork.no> wrote: > Satyam Mathura <satz...@gmail.com> writes: > > > Line 204 in my users file is the following: > > DEFAULT Auth-Type := Reject > > You don't want that. It removes the server's ability to figure it out > by itself. > > > > my radgroupcheck config: > > +----+------------------+----------------+----+----------------+ > > | id | groupname | attribute | op | value | > > +----+------------------+----------------+----+----------------+ > > | 5 | engineeringadmin | Huntgroup-Name | == | admin | > > | 6 | engineeringadmin | Auth-Type | := | Accept | > > Why? This will make the server act as you describe: Any username in the > engineeringadmin group will be accepted regardless of password. > > > Bjørn > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html