Greetings, We have a bit of an odd setup (apparently). We have a vendor that is providing services based on whether a user has an active and authorized session. In order to support this we forward on accounting data with a detail file writer and reader, using the copy-acct-to-home-server as a template.
This is using FreeRadius 2.1.8. I have always felt lame ascii drawings help, so this is the setup (in essence): request: NAS -> accounting-server | copy | -> vendor response: NAS <- accounting-server <- vendor Unfortunately, we seem to be hitting a wall in terms of packets transmitted to the vendor. It is my understanding that the detail reader is serial in nature, meaning it only sends one packet to the vendor (in this case), and will not send another until it gets a response. The vendor is over a slow link, or the packets are otherwise delayed, so we are getting a backlog of detail entries. The detail file is filling faster than it can be flushed to the vendor. My question is, how can we fix this? A few ideas have been batted around. One is to write some code (via rlm_perl or rlm_python) that essentially does what the entire writer/reader combination is doing, only in parallel. Meaning, it handles transmitting and retransmitting to the vendor. In the short term this might be viable, but it's reinventing wheels, and it's hard to justify long-term given most of the people dealing with this are not programmers. Another was to somehow load-balance the readers. I cannot find a configuration example to support this, but would it be possible, and more importantly useful, to have multiple readers pointing to the same detail file? Any help or suggestions would be appreciated. Thanks. -- Michael Fowler www.shoebox.net - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html