what should i write in client.conf mine is like this: client fremont.iqwer.com { ipaddr = 173.233.234.52 shortname = fremont secret = 19861230 nastype = other }
2010/6/8 Spacelee <fjct...@gmail.com> > on the radius server, i type the two command , and get those results, the > iptables has been shutdown > > > radtest test test localhost 1812 19861230 > Sending Access-Request of id 124 to 127.0.0.1 port 1812 > User-Name = "test" > User-Password = "test" > NAS-IP-Address = 127.0.0.1 > NAS-Port = 1812 > rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=124, > length=20 > > > radtest test test 173.224.212.50 1812 19861230 > Sending Access-Request of id 236 to 173.234.232.50 port 1812 > User-Name = "test" > User-Password = "test" > NAS-IP-Address = 127.0.0.1 > NAS-Port = 1812 > Sending Access-Request of id 236 to 173.224.212.50 port 1812 > User-Name = "test" > User-Password = "test" > NAS-IP-Address = 127.0.0.1 > NAS-Port = 1812 > Sending Access-Request of id 236 to 173.224.212.50 port 1812 > User-Name = "test" > User-Password = "test" > NAS-IP-Address = 127.0.0.1 > NAS-Port = 1812 > radclient: no response from server for ID 236 socket 3 > > > 2010/6/8 Spacelee <fjct...@gmail.com> > >> this is the file users' content >> test Auth-Type:=MS-CHAP, User-Password:="test", Simultaneous-Use:=100 >> Service-Type = Framed-User, >> Framed-Protocol = PPP, >> Framed-IP-Address = 255.255.255.254, >> Framed-IP-Netmask = 255.255.255.0 >> >> >> >> 2010/6/8 Spacelee <fjct...@gmail.com> >> >> i use netstat and found there is radius listen on 1812, 1813 and 1814 >>> using udp >>> i shut down all the iptables both on the server of pptp and the server >>> radius >>> >>> but the pptp can't be authenticated , the log is >>> >>> RADIUS plugin initialized. >>> Jun 8 15:26:29 mountainview pppd[4604]: Plugin >>> /usr/lib64/pppd/2.4.4/radattr.so loaded. >>> Jun 8 15:26:29 mountainview pppd[4604]: RADATTR plugin initialized. >>> Jun 8 15:26:29 mountainview pppd[4604]: Plugin >>> /usr/lib64/pptpd/pptpd-logwtmp.so loaded. >>> Jun 8 15:26:29 mountainview pppd[4604]: pptpd-logwtmp: $Version$ >>> Jun 8 15:26:29 mountainview pppd[4604]: pppd 2.4.4 started by root, uid >>> 0 >>> Jun 8 15:26:29 mountainview pppd[4604]: Using interface ppp0 >>> Jun 8 15:26:29 mountainview pppd[4604]: Connect: ppp0 <--> /dev/pts/1 >>> Jun 8 15:27:03 mountainview pppd[4604]: rc_send_server: no reply from >>> RADIUS server puppet:1812 >>> Jun 8 15:27:03 mountainview pppd[4604]: Peer test failed CHAP >>> authentication >>> Jun 8 15:27:03 mountainview pppd[4604]: Connection terminated. >>> Jun 8 15:27:03 mountainview pppd[4604]: Exit. >>> >>> >>> it says there is not reply >>> >>> 2010/6/8 Alan Buxey <a.l.m.bu...@lboro.ac.uk> >>> >>> Hi, >>>> > i can start freeradius ok, but my pptp can't remote access radius >>>> server, I telnet 1812 or 1813 , but both are connection refused, i don't >>>> know what to do with this situation >>>> >>>> firewall eg iptables , on the server you put freeradius on? >>>> >>>> alan >>>> - >>>> List info/subscribe/unsubscribe? See >>>> http://www.freeradius.org/list/users.html >>>> >>> >>> >>> >>> -- >>> Spacelee >>> >> >> >> >> -- >> Spacelee >> > > > > -- > Spacelee > -- Spacelee
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html