> Look at modules/realm > This is how you "split" off domain\user or u...@domain.
I did look at that file before I posted, but I don't know what I could change in it that would help me. It looks like the only think that is set in that file is the delimiter. The suffix delimiter is correct, but I still cannot get authenticated with the usern...@domain convention. I tried adding the following to my realms file but it does nothing -------------------------- realm umhb.edu { format = suffix delimiter = "@" } realm cru { format = suffix delimiter = "@" } -------------------------- Jake Sallee Godfather Of Bandwidth Network Engineer Fone: 254-295-4658 Phax: 254-295-4221 -----Original Message----- From: freeradius-users-bounces+jake.sallee=umhb....@lists.freeradius.org [mailto:freeradius-users-bounces+jake.sallee=umhb....@lists.freeradius.o rg] On Behalf Of Johan Meiring Sent: Thursday, August 05, 2010 2:03 PM To: freeradius-users@lists.freeradius.org Subject: Re: suffix configuration On 2010/08/05 08:37 PM, Sallee, Stephen (Jake) wrote: >> realms > > ... thank you. Whilst I do appreciate brevity, a single monosyllabic > response seems as though it may be a bit too brief : ) > > Can you elaborate? I am not asking for anyone so solve my problem for > me but rather to be pointed in the correct direction. > Was hoping you had read all the files in /etc/radiusd (or /etc/freeradius) already. Look at modules/realm This is how you "split" off domain\user or u...@domain. -- Johan Meiring Cape PC Services CC Tel: (021) 883-8271 Fax: (021) 886-7782 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html