On Wed, Aug 11, 2010 at 12:40 PM, Alan DeKok <al...@deployingradius.com>wrote:
> Peter Lambrechtsen wrote: > > I have figured out where my mistake was. I needed to have the users > > file being used in the authorize section, but I shouldn't have had > > "Auth-Type := Accept" at the end of each line for the Groups, otherwise > > if the Auth-Type is set to Accept the authenticate section is never run > > through. > > That's pretty much what I was trying to explain earlier. When you > posted another config snippet that *didn't* follow my advice, I lost > interest in the thread. > Fair enough, you do get a lot of silly setup questions which you answer most of the time ;) > I have *no* idea why so many people insist on forcing Auth-Type. It > causes problems in 99.9% of the situations, including this one. > Understood, I had just taken examples off the internet about how to setup LDAP Auth, which was very misleading by having the Auth-Type being set which caused all of my issues in the first place. My offer still stands to write up a wiki entry for this, as it seems to be quite a common question and use case that could be answered with a wiki entry.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html