Step 1: Read the wimax dictionary file. It will help you understand what types of data you need to be putting into each attribute.
update disconnect { User-Name = "%{User-Name}" Calling-Station-Id = "%{Calling-Station-Id}" WiMAX-AAA-Session-Id = "%{WiMAX-AAA-Session-Id}" WiMAX-DM-Action-Code = Deregister-MS } The session ID needs to be identical to the one returned to the ASN-GW during network entry. man unlang for more info. For testing from the CLI echo the required attributes into radclient. man radclient Ben From: freeradius-users-bounces+wiechman.lists=gmail....@lists.freeradius.org [mailto:freeradius-users-bounces+wiechman.lists=gmail....@lists.freeradius.o rg] On Behalf Of Xiaochen Sent: Tuesday, August 31, 2010 8:44 PM To: freeradius-users@lists.freeradius.org Subject: ask for help on WiMAX + Freeradius + Disconnect Hello, friends, As I met some problems when using Freeradius to send Disconnect Request. Hope you can give me any suggestions. Please let me describe my issue. First I created a packete.txt for radclinet.exe. The content of packet.txt is as: Acct-Session-Id="00000001" Calling-Station-Id="001E310008CC" User-Name="wimax" X-Ascend-Session-Svr-Key="0123456789" NAS-IP-Address=100.1.6.5 NAS-Identifier=100.1.6.5 WiMAX-Session-ID=”XXXXXXX” WiMAX-DM-Action-Code=”0000ffff” After packet.txt was sent to AGW, radclinet debug window said: “Unknown WiMAX-Session -ID or Unknown WiMAX-DM-Action-Code ” WiMAX NWG 1.3 says: 5.4.1.7 RADIUS Disconnect Request Message isconnect Request message should be defined with the following: User-Name、Calling-Station-Id、 WiMAX-Session-ID、 WiMAX-DM-Action-Code So I must add and make WiMAX-Session-ID and WiMAX-DM-Action-Code sent by Freeradius. Could you please give me any suggestions on how to add the attribute of WiMAX-Session-ID and WiMAX-DM-Action-Code into the sent message ? Thanks a lot for your help in advance! Xiaochen Chen @ WiMAX Test Lab Beiing , China - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html