Hi David, 1) You have to configure the radius server to use the inner-tunnel.
Following are the entries in the eap.conf file. ttls { default_eap_type = md5 copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" } I hope this is what you meant by configure inner-tunnel in radius server. Actually, the FreeRadius server is sending the Access-Accept with all WiMAX Attributes for the user as we have given in the "users" file. But I think the Alvarion ASN Gateway is not handling or recognizing what we are sending 2) Which version of the 4-Motion software are you using on your system? We are using 4motion Release 2.5M1. Regards Anup > Anup, > > You have to configure the radius server to use the inner-tunnel. Which > version of the 4-Motion software are you using on your system? > > David > > > -----Original Message----- > From: > freeradius-users-bounces+david.peterson=acc-corp....@lists.freeradius.org > [mailto:freeradius-users-bounces+david.peterson=acc-corp....@lists.freeradiu > s.org] On Behalf Of Anup krishnan A > Sent: Wednesday, October 06, 2010 4:11 AM > To: FreeRadius users mailing list > Subject: Re: WiMax VSA Support > > > Hi Alan, > > Thank you for your quick response. > > We have already checked the dictionary and found that wimax dictionary is > available in the freeradius server. > > Actually we are using Freeradius server 2.1.9 and Alvarion base-station > and > Alvarion ASN GW. Initially we created a service profile in Alvarion ASN GW > for the user "test" using their management software 'AlvariStar'. > And 'users' file in the freeradius has been updated to add the user "test" > as follows, > > test Cleartext-Password := "test" > Auth-Type = Local, > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-IP-Address = 192.168.0.33, > Framed-IP-Netmask = 255.255.255.0, > Framed-Routing = Broadcast-Listen, > Filter-Id = "servprof2" > > where "servprof2" is the name of the service profile created in Alvarion > ASN > GW. In this case the authentication was successful and MS has got the IP > as > well. > > Then we tried to create the service profile for the user "test" from the > Freeradius by using WiMAX attributes found in the file > dictionary.wimax'.The > entries for the user in the 'users' file is as shown below. > > test Cleartext-Password := "test" > Auth-Type = Local, > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-IP-Address = 192.168.0.33, > Framed-IP-Netmask = 255.255.255.0, > WiMAX-Service-Profile-Id=1, > WiMAX-Media-Flow-Type=Streaming-Video, > WiMAX-Schedule-Type = Best-Effort, > WiMAX-QoS-Id=01, > WiMAX-Media-Flow-Type=Robust-Browser, > WiMAX-Traffic-Priority=0, > WiMAX-Maximum-Sustained-Traffic-Rate=512000 > > In this case Freeradius has sent the Access-Accept, but the authentication > process is not successful and MS is showing an error message as "EAP > supplicant transferring error". > > I hope you understand the problem > > Regards, > Anup > > > >> Anup wrote: >>> Hi, >>> I would like to know whether latest Freeradius version has the >>> support for WiMax VSAs? >> >> The server comes with documentation and dictionary files. Please >> read them. >> >>> Also please tell me how to send the WiMAX Qos Descriptors in >>> Access-Accept >> >> VSAs are just attributes. They can be added / edited like anything >> else. >> >> Alan DeKok. >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> > > > > ----------------------------------------- > This email was sent using SquirrelMail. > "Webmail for nuts!" > http://squirrelmail.org/ > > > ______________________________________ > Scanned and protected by Email scanner > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > ----------------------------------------- This email was sent using SquirrelMail. "Webmail for nuts!" http://squirrelmail.org/ ______________________________________ Scanned and protected by Email scanner - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html