Rangel, Luciano wrote: > I Success authentication but the switch not assign vlan 200 to client > port as log below: > > *Why the switch taking the VLAN 0?*
Because the switch is ignoring the VLAN in the Access-Request. > PS. I tested sending attribute with Cisco ACS and ran There's no magic here. Look at the Access-Request from ACS. It's different than the Access-Request from FreeRADIUS. So... make FreeRADIUS send the same attributes in the Access-Request. It *will* work. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
