On Tue, Dec 21, 2010 at 3:52 PM, Miha Zoubek <miha_zou...@hotmail.com> wrote: > Belive me that I am asking centile people to. And to let you know I have > begun asking centile.com before I made first post on this forum.
I noticed from you earlier debug output that the NAS is sending different attributes. The working one (I selected some attributes only): NAS-Identifier = "intraswitch" NAS-IP-Address = 1.2.3.4 3GPP2-Prepaid-acct-Capability = 0x010600000002 3GPP2-Session-Termination-Capability = 1 h323-conf-id = "h323-conf-id=1292574457509" Vendor-Specific = 0x00000009 the non working one Called-Station-Id = "38651357952" Cisco-AVPair = "h323-called-enterprise-id=External" h323-remote-address = "h323-remote-address=unknown" Acct-Session-Id = "129257445750920" h323-conf-id = "h323-conf-id=1292574457509" h323-incoming-conf-id = "h323-incoming-conf-id=1292574457509" 3GPP2-Prepaid-Acct-Quota = 0x0a06564f495008040002 Acct-Status-Type = One-Time Message-Authenticator = 0x6f793daff586ab35701631c5f2a48d96 why is that? It almost seems like the request was made from two different NAS. In your question to centile people, it might help to also ask whether the device has more than one radius config section. -- Fajar - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html