I tested using the "listen" configuration, but still had the same result. But if I comment out the "thread pool" section and everything works fine.
Any other ideas? Thanks, Keven -----Original Message----- From: freeradius-users-bounces+keven.smith-worthylake=genband....@lists.freeradius.org [mailto:freeradius-users-bounces+keven.smith-worthylake=genband....@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Tuesday, December 07, 2010 4:14 PM To: FreeRadius users mailing list Subject: Re: thread pools in 2.1.10 Keven Smith-Worthylake wrote: > When we start radiusd with a thread pool configured, none of the requests > from the pam-radius-auth proxy client are serviced/processed. The client > never gets a reply from the server. From the server logs, the request is > never seen. Because it's not listening on any ports. You appear to have copied your configuration from 1.1.7 nearly verbatim to 2.1.10. This is probably not a good idea. > I noticed that when the server is started without the thread pool, the > following logs are displayed (but they are not displayed when the thread pool > is configured): You've also ignored the warning message before the text you quoted. Add a "listen" section, as given in the default config for 2.1.10. We don't really test 2.1.10 with copies of the 1.1.7 configuration. It's *intended* to mostly work. But if it doesn't work, well... people can always read the warnings, and/or use the 2.1.10 configuration. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html