Let's just say that it appears to be Vendor specific. As I can't release details, is required to be in a dictionary file in order to work properly?
David -----Original Message----- From: Ben Wiechman [mailto:wiechman.li...@gmail.com] Sent: Tuesday, January 11, 2011 10:36 AM To: David Peterson-WirelessConnections; FreeRadius users mailing list Subject: RE: Sub-TLV's Quick SQL dump: INSERT INTO `radgroupreply` (`id`, `groupname`, `attribute`, `op`, `value`) VALUES (208, 'WiMAX_Test3', 'WiMAX-QoS-Id', ':=', '101'), (209, 'WiMAX_Test3', 'WiMAX-Service-Class-Name', ':=', 'DATA'), (210, 'WiMAX_Test3', 'WiMAX-Schedule-Type', ':=', 'Best-Effort'), (211, 'WiMAX_Test3', 'WiMAX-Traffic-Priority', ':=', '1'), (212, 'WiMAX_Test3', 'WiMAX-Maximum-Sustained-Traffic-Rate', ':=', '512000'), (213, 'WiMAX_Test3', 'WiMAX-Reduced-Resources-Code', ':=', '1'), (214, 'WiMAX_Test3', 'WiMAX-QoS-Id', '+=', '102'), (215, 'WiMAX_Test3', 'WiMAX-Service-Class-Name', '+=', 'DATA'), (216, 'WiMAX_Test3', 'WiMAX-Schedule-Type', '+=', 'Best-Effort'), (217, 'WiMAX_Test3', 'WiMAX-Traffic-Priority', '+=', '1'), (218, 'WiMAX_Test3', 'WiMAX-Maximum-Sustained-Traffic-Rate', '+=', '400000'), (219, 'WiMAX_Test3', 'WiMAX-Reduced-Resources-Code', '+=', '1'), (220, 'WiMAX_Test3', 'WiMAX-Packet-Data-Flow-Id', ':=', '21'), (221, 'WiMAX_Test3', 'WiMAX-Service-Data-Flow-Id', ':=', '21'), (222, 'WiMAX_Test3', 'WiMAX-Direction', ':=', 'Uplink'), (223, 'WiMAX_Test3', 'WiMAX-Activation-Trigger', ':=', '15'), (224, 'WiMAX_Test3', 'WiMAX-Transport-Type', ':=', 'IPv4-CS'), (225, 'WiMAX_Test3', 'WiMAX-Uplink-QOS-Id', ':=', '101'), (226, 'WiMAX_Test3', 'WiMAX-Uplink-Classifier', ':=', 'permit in any src any dst any priority 1'), (227, 'WiMAX_Test3', 'WiMAX-Packet-Data-Flow-Id', ':=', '22'), (228, 'WiMAX_Test3', 'WiMAX-Service-Data-Flow-Id', ':=', '22'), (229, 'WiMAX_Test3', 'WiMAX-Direction', ':=', 'Downlink'), (230, 'WiMAX_Test3', 'WiMAX-Activation-Trigger', ':=', '15'), (231, 'WiMAX_Test3', 'WiMAX-Transport-Type', ':=', 'IPv4-CS'), (232, 'WiMAX_Test3', 'WiMAX-Downlink-QOS-Id', ':=', '102'), (233, 'WiMAX_Test3', 'WiMAX-Downlink-Classifier', ':=', 'permit in any src any dst any priority 1'); Working example using a Wichorus ASN-GW. As Alan said, you can check the dictionary. I'm not familiar with that TLV so you might have to add it to the dictionary if it is post Release 1.3. Ben > -----Original Message----- > From: freeradius-users- > bounces+wiechman.lists=gmail....@lists.freeradius.org > [mailto:freeradius-users- > bounces+wiechman.lists=gmail....@lists.freeradius.org] On Behalf Of > David Peterson > Sent: Tuesday, January 11, 2011 9:26 AM > To: 'FreeRadius users mailing list' > Subject: RE: Sub-TLV's > > OK perhaps an example of what I need to reply might be in order. I > have to send a WiMAX TLV WIMAX-Packet-Flow-Descriptor with say all > four sub- tlv's. > Would I format the reply as such: > > Sub-tlv1 := value > Subtlv2 += value2 > > > Also, do you know if there is a TLV named R3-IF-Descriptor? I can't > seem to locate it, it should be a newer WiMAX TLV. > > David > > -----Original Message----- > From: > freeradius-users-bounces+david.peterson=acc- > corp....@lists.freeradius.org > [mailto:freeradius-users-bounces+david.peterson=acc- > corp....@lists.freeradiu > s.org] On Behalf Of Alan DeKok > Sent: Tuesday, January 11, 2011 10:08 AM > To: David Peterson-WirelessConnections; FreeRadius users mailing list > Subject: Re: Sub-TLV's > > David Peterson wrote: > > Is there support for Sub-TLV attributes currently > > Some. See dictionary.wimax > > > and if so, can someone > > point me to documentation on how to format a reply for them? > > Just use the name, like any other attribute. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html