Please correct my assumption if I am off.... I have been working on getting reply attributes sent out to define VLAN's etc on a WiMax NAS. I see the following in radiusd -X:
(3495) [ttls] Got tunneled reply code 2 WiMAX-VLAN-ID := 192 WiMAX-Classifer-Direction = Bi-Directional WiMAX-Classifer-Priority = 1 WiMAX-ClassifierID = 1 WiMAX-Downlink-QOS-Id = 1 WiMAX-Uplink-QOS-Id = 1 WiMAX-Transport-Type = Ethernet WiMAX-Direction = Bi-Directional WiMAX-Packet-Data-Flow-Id = 1 WiMAX-QoS-Id = 1 WiMAX-Schedule-Type = Best-Effort WiMAX-Maximum-Sustained-Traffic-Rate = 31457289 WiMAX-R3-IF-Name = "vpws" WiMAX-PDFID = 1 MS-CHAP2-Success = 0x1f533d38324436443835383335433145344237364441413938463137364443453038334643 374646363245 MS-MPPE-Recv-Key = 0xaaa52b27b269158aa25a2c3c36612ec4 MS-MPPE-Send-Key = 0xfd2e2270200bf84a3c9e34afe8eed5c1 MS-MPPE-Encryption-Policy = Encryption-Allowed MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (3495) [ttls] Got tunneled Access-Accept Which would suggest that I am sending those TLV's in a radius packet. However, I ran Wireshark and do not see these TLV's in any radius packet. What would stop freeradius from creating these TLV's in the packet. I am thinking my dictionary.wimax additions are to blame or perhaps I need to use different operators. Any thoughts would be greatly appreciated. David -----Original Message----- From: freeradius-users-bounces+david.peterson=acc-corp....@lists.freeradius.org [mailto:freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradiu s.org] On Behalf Of David Peterson Sent: Friday, March 11, 2011 11:55 AM To: 'FreeRadius users mailing list' Subject: RE: Access Accept vs Tunneled reply I am wondering if it's a misconfiguration of a group reply. I have those attributes listed as a group-reply. Would putting the attributes in the normal vs the group reply put them in a different portion of the response? David -----Original Message----- From: freeradius-users-bounces+david.peterson=acc-corp....@lists.freeradius.or freeradius-users-bounces+g [mailto:freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradiu s.org] On Behalf Of Alexander Clouter Sent: Friday, March 11, 2011 10:28 AM To: freeradius-users@lists.freeradius.org Subject: Re: Access Accept vs Tunneled reply David Peterson <dav...@wirelessconnections.net> wrote: > > These values are unique per user. Is there an elegant way to copy > this to the post-auth section? > The following might help? http://lists.freeradius.org/mailman/htdig/freeradius-users/2011-January/msg0 0353.html Cheers -- Alexander Clouter .sigmonster says: What garlic is to food, insanity is to art. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html