Hi, My problem is that the attributes I have entered in the users file (under the specific user) are not present inside the Access-Accept message replied to the ASN-GW/NAS. The scenario is the same also for the regular Wimax attributes. The += parameter just doesn't work, the second attribute which is identical to a previous one (and provisioned with +=) is not being inserted to the Access-Accept message.
Thanks, Shai. -----Original Message----- From: freeradius-users-bounces+mizrachi.shai=gmail....@lists.freeradius.org [mailto:freeradius-users-bounces+mizrachi.shai=gmail....@lists.freeradius.or g] On Behalf Of Alan DeKok Sent: Tuesday, May 31, 2011 8:19 AM To: FreeRadius users mailing list Subject: Re: Repeating the same attribute in reply message Shai Mizrachi wrote: > The users are configured inside /etc/raddb/users (no D.B is used). > All of the Wimax parameters are working fine, it is just the repeated > attributes which are failing (not sure this is related to Wimax ?) It would help if you said what was *actually* heppening. > I am attaching the output of the radiusd -X, followed by the user > configured in the users file. ... > R3-IF-Name += DHCP_Relay_SG, > PDFID += 2, These attributes are NOT in the dictionaries for 2.1.7. If the server doesn't complain about them, it's because you've edited the dictionaries. If you're going to use Alvarion (which is NOT standard WiMAX), you will need to use the "master" branch from http://git.freeradius.org And you will need to: - delete the standard wimax && alvarion dictionaries - enable the non-standard dictionary.wimax.alvarion, and dictionary.alvarion.wimax My $0.02 is that you should probably be asking Alvarion for help. They've gone out of their way to *not* implement the standard. Everything they do is broken, and they don't see a problem with that. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html