Hello,
I have a problem with my pools in freeradius. The problems is that it
is not releasing IPs from the pools. At least, not all of them, so after
a while my users can't connect because the pool is full.
I check that it is not releasing IPs because I get (I have replaced
usernames with XXXX):
root@vulpes21:/usr/share/doc/freeradius# radwho | grep 155.54.194
XXXXXXXX XXXXXXXXX PPP >999 Wed 10:28 155.54.213.20 155.54.194.128
XXXXXXXX XXXXXXXXX PPP >999 Wed 10:36 155.54.213.20 155.54.194.51
XXXXXXXX XXXXXXXXX PPP >999 Wed 10:42 155.54.213.20 155.54.194.8
XXXXXXXX XXXXXXXXX PPP >999 Wed 12:33 155.54.213.20 155.54.194.115
XXXXXXXX XXXXXXXXX PPP >999 Wed 12:37 155.54.213.20 155.54.194.101
XXXXXXXX XXXXXXXXX PPP >999 Wed 12:40 155.54.213.20 155.54.194.62
XXXXXXXX XXXXXXXXX PPP >999 Wed 13:06 155.54.213.20 155.54.194.92
XXXXXXXX XXXXXXXXX PPP >999 Wed 13:11 155.54.213.20 155.54.194.48
XXXXXXXX XXXXXXXXX PPP >999 Wed 13:24 155.54.213.20 155.54.194.78
XXXXXXXX XXXXXXXXX PPP >999 Wed 13:27 155.54.213.20 155.54.194.112
XXXXXXXX XXXXXXXXX PPP >999 Wed 13:28 155.54.213.20 155.54.194.59
XXXXXXXX XXXXXXXXX PPP >999 Wed 13:29 155.54.213.20 155.54.194.134
but rlm_ippol_tool shows a lot of IP addresses in use:
root@vulpes21:/etc/freeradius# rlm_ippool_tool -a pool_vpn.ippool
pool_vpn.ipindex | wc -l
122
In my configuration I have:
authorize {
vpn_log
vpn_syslog
suffix
files_vpn
pap
}
authenticate {
Auth-Type PAP {
pap
}
Auth-Type LDAP {
ldap-email
}
}
preacct {
suffix
files_vpn
}
accounting {
vpn_log
unix
pool_vpn
pool_vpn_alu
pool_vpn_ryt
radutmp
vpn_acc_syslog
sql_log_um
}
session { }
post-auth {
pool_vpn
pool_vpn_alu
pool_vpn_ryt
vpn_log
vpn_syslog
}
pre-proxy { }
post-proxy { }
Any idea?
Ah... I'm running 2.1.8 from ubuntu 10.04.
--
Angel L. Mateo Martínez
Sección de Telemática
Área de Tecnologías de la Información _o)
y las Comunicaciones Aplicadas (ATICA) / \\
http://www.um.es/atica _(___V
Tfo: 868887590
Fax: 868888337
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
