2011/10/17 Fajar A. Nugraha <l...@fajar.net> > On Mon, Oct 17, 2011 at 2:18 PM, Alejandro Gandara > <agand...@optaresolutions.com> wrote: > > > > Hi List, > > > > > > I have two doubts which I couldn't resolv properly. I'll be so pleased if > > someone could give me a hand. > > > > 1º There is any way to configure ippool to give a gateway for each > > configured pool? > > Short version: no. > > Long answer: > AFAIK rlm_ipool and rlm_sqlippool only hand-out IP addresses in > Framed-IP-Address attribute. > However, if you use rlm_sqlippool, it should be easy enough to have an > additional custom sql table (or additional column) which (for example) > store the default gateway for each IP address. You can then use unlang > to send this information in Framed-Route attribute. Your NAS has to > support it though, otherwise the attribute will be silently ignored. > > > > > 2º How I could check the bind addresses in db.* files? > > try http://wiki.freeradius.org/Rlm_ippool_tool > I'd recommend you use rlm_sqlippool instead though. >
When I use this tool I got users identified by keys, where could I find the map (or relation) of keys with users?. I need know which Users is conneceted which each IP. > > > > > 3º Radiuis-Framed-Routing is used to configure a gateway for each > profile? > > See http://freeradius.org/rfc/rfc2865.html for a description on what > each attribute is for. > > I' ve seen i can manage Radius-Framed-Route to fix my problem. Mixing this with ippool could be a right solutions.( I hope). I've seen too i can configure default gateways with this attribute such as: 0.0.0.0 10.0.2.1 . where the first element is the network (default) and the second one is the gateway used. Is this true? Thanks for your time and your faster answer. Regards Alejandro > -- > Fajar > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html