Hi, Sorry I resend the message because of original message was bounced because it was big.
I have a really weird problem. We have a lot of NAS'es and no one of them had this problem, except only one! It gets always login incorrect. If I run eapol_test it complains saying. I've tried replacing the nas a few times and makes no difference. And it doesnt' matter what user tries to connect. Please take a look to user "interup" with outer identity "SOYKADORNA" I think I've found something about it http://www.ietf.org/rfc/rfc3579.txt 2.6.3 (Conflicting message) That could be the problem? Thanks in advance Below the debug messsages: FreeRADIUS Version 2.1.1, for host x86_64-unknown-linux-gnu, built on Oct 21 2008 at 15:14:37 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/files.backup including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/status including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default.backup including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap group = radiusd user = radiusd including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = yes auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client spectrum { require_message_authenticator = no secret = "testing123" shortname = "spectrum.sarlanga.edu" } client 10.128.255.100 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-PB" } client 10.129.0.100 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-PB" } client 10.128.255.10 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-SS" } client 10.129.0.10 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-SS" } client 10.128.255.11 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-1" } client 10.129.0.11 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-1" } client 10.129.0.199 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "Transitional" } client 10.129.254.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "Transitional" } client 10.129.0.12 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-2" } client 10.129.0.111 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-2-bis" } client 10.128.255.13 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-3" } client 10.129.0.13 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-3" } client 10.128.255.14 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-4" } client 10.129.0.14 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-4" } client 10.128.255.15 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-5" } client 10.129.0.15 { require_message_authenticator = no secret = "sarlangalad0-Red-3-winnie" shortname = "AP-PI-5" } client 10.128.255.60 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-0" } client 10.129.0.60 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-0" } client 10.128.255.61 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-I" } client 10.129.0.61 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-I" } client 10.129.158.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-SS" } client 10.129.80.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-PB" } client 10.128.255.81 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I" } client 10.129.81.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I" } client 10.128.255.82 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-II" } client 10.129.82.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-II" } client 10.128.250.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-Bridge" } client 10.128.255.172 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis_test" } client 10.128.255.83 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-III" } client 10.129.0.83 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-III" } client 10.129.83.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-III" } client 10.128.255.84 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-IV" } client 10.129.84.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-IV" } client 10.128.255.181 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis" } client 10.129.181.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis" } client 10.129.162.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-I_bis_2" } client 10.128.255.86 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VI" } client 10.129.86.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VI" } client 10.128.255.87 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VII" } client 10.129.0.87 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VII" } client 10.129.87.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VII" } client 10.129.187.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VII-Derecho" } client 10.129.99.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-Pivot" } client 10.128.255.52 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PV-PB" } client 10.128.255.85 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-V" } client 10.129.0.85 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-V" } client 10.129.85.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-V" } client 10.129.0.189 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-IX-HD" } client 10.129.189.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-IX-HD" } client 10.129.88.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-PVIII-VIII" } client 10.129.0.89 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "oficina-test" } client 10.129.89.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "oficina-test" } client 10.128.255.160 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Sociales-Auditorio" } client 10.128.255.190 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-NONAT" } client 10.129.90.1 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "sarlanga-X" } client 192.168.2.53 { require_message_authenticator = no secret = "akantilad0-Green-22" shortname = "sarlanga3" } client 192.168.45 { require_message_authenticator = no secret = "sarlangalad0-black-54" shortname = "sarlanga4" } client 192.168.3.201 { require_message_authenticator = no secret = "sarlangalad0-blue-246692" shortname = "sarlanga7" } client 192.168.4 { require_message_authenticator = no secret = "PEPE" shortname = "AP-sarlanga7" } client 192.168.142.240 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Cabre-1" } client 192.168.142.241 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Cabre-2" } client 192.168.142.242 { require_message_authenticator = no secret = "sarlangalad0-Red-398952" shortname = "AP-Cabre-3" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server status { modules { Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_always Module: Instantiating ok always ok { rcode = "ok" simulcount = 0 mpp = no } } } server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "ldap.sarlanga.edu" port = 636 password = "sarlanga" identity = "cn=freeradius,ou=applications,dc=sarlanga,dc=edu" net_timeout = 10 timeout = 120 timelimit = 30 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no cacertfile = "/etc/raddb/cacert.pem" randfile = "/dev/urandom" require_cert = "demand" } basedn = "ou=people,dc=sarlanga,dc=edu" filter = "(uid=%u)" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr = "radiusAllowed" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap_debug = 40 ldap_connections_number = 15 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusPassword mapped to RADIUS Cleartext-Password conns: 0xba35710 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "ttls" timer_expire = 600 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/pki/tls/certs/ips-spectrum-key.pem" certificate_file = "/etc/pki/tls/certs/spectrum.sarlanga.edu.cer" CA_file = "/etc/pki/tls/certs/IPS-IPSCABUNDLE.crt" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = yes lifetime = 6 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel-peap" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating post_proxy_log detail post_proxy_log { detailfile = "/usr/local/var/log/radius/radacct/postproxy/%{Client-IP-Address}/post-proxy-detail-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking post-auth {...} for more modules to load Module: Instantiating reply_log detail reply_log { detailfile = "/usr/local/var/log/radius/radacct/replies/%{Client-IP-Address}/reply-detail-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } server inner-tunnel-peap { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating auth_log detail auth_log { detailfile = "/usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 192.168.1.5 port = 0 } listen { type = "acct" ipaddr = 192.168.1.5 port = 0 } listen { type = "status" ipaddr = 127.0.0.1 port = 18120 client admin { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "YellowSubmarine" } } Listening on authentication address 192.168.1.5 port 1812 Listening on accounting address 192.168.1.5 port 1813 Listening on status address 127.0.0.1 port 18120 as server status Ready to process requests. rad_recv: Access-Request packet from host 192.168.4 port 39611, id=0, length=128 User-Name = "SOYKADORNA" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0200000f01534f594b41444f524e41 Message-Authenticator = 0x7d52a44c132c7bc77146e1c0f207d3a5 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: %{Virtual-Server} -> [auth_log] expand: /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d -> /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d expands to /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] expand: %t -> Fri Dec 16 09:49:52 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "SOYKADORNA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 15 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.4 port 39611 EAP-Message = 0x010100061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x869e7309869f6616768684a64fbb490b Finished request 8. Going to the next request Waking up in 3.5 seconds. rad_recv: Access-Request packet from host 192.168.4 port 39611, id=1, length=137 User-Name = "SOYKADORNA" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x020100060319 State = 0x869e7309869f6616768684a64fbb490b Message-Authenticator = 0x5d842b0560785988f065cf3bf41a8be3 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: %{Virtual-Server} -> [auth_log] expand: /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d -> /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d expands to /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] expand: %t -> Fri Dec 16 09:49:52 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "SOYKADORNA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.4 port 39611 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x869e7309879c6a16768684a64fbb490b Finished request 9. Going to the next request Waking up in 3.5 seconds. rad_recv: Access-Request packet from host 192.168.4 port 39611, id=2, length=253 User-Name = "SOYKADORNA" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0202007a198000000070160301006b0100006703014eeb3ec87be73aa918030263d5e73f349398bd48e8176a62ce944dcf0c6b95cf00003a00390038008800870035008400160013000a00330032009a009900450044002f00960041000500040015001200090014001100080006000300ff0100000400230000 State = 0x869e7309879c6a16768684a64fbb490b Message-Authenticator = 0x0786010bb78d36cc0a93b73a3a9b7a0f +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: %{Virtual-Server} -> [auth_log] expand: /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d -> /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d expands to /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] expand: %t -> Fri Dec 16 09:49:52 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "SOYKADORNA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 122 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 112 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006b], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 004a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 12d7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.4 port 39611 EAP-Message = 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 EAP-Message = 0x43657274696669636163696f6e657331193017060355040313106970734341204c6576656c20312043413124302206092a864886f70d010901161569707363616c6576656c314069707363612e636f6d301e170d3039313232323232353731355a170d3132303132373232353731355a30818d310b3009060355040613024152311530130603550407130c4275656e6f73204169726573311f301d060355040a1316556e6976657273696461642064652050616c65726d6f31273025060355040b131e446570617274616d656e746f20646520436f6d756e69636163696f6e6573311d301b06035504031314737065637472756d2e70616c65726d6f2e EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x415445442e20434c41534541 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x869e7309849d6a16768684a64fbb490b Finished request 10. Going to the next request Waking up in 3.4 seconds. rad_recv: Access-Request packet from host 192.168.4 port 39611, id=2, length=253 Sending duplicate reply to client AP-sarlanga7 port 39611 - ID: 2 Sending Access-Challenge of id 2 to 192.168.4 port 39611 Waking up in 0.4 seconds. Cleaning up request 0 ID 222 with timestamp +2 Cleaning up request 1 ID 223 with timestamp +2 Cleaning up request 2 ID 224 with timestamp +2 Cleaning up request 3 ID 225 with timestamp +2 Cleaning up request 4 ID 226 with timestamp +2 Cleaning up request 5 ID 227 with timestamp +2 Cleaning up request 6 ID 228 with timestamp +2 Waking up in 1.0 seconds. Cleaning up request 7 ID 229 with timestamp +2 Waking up in 0.2 seconds. Cleaning up request 8 ID 0 with timestamp +4 Cleaning up request 9 ID 1 with timestamp +4 Cleaning up request 10 ID 2 with timestamp +4 Ready to process requests. rad_recv: Accounting-Request packet from host 192.168.45 port 55272, id=48, length=193 Acct-Session-Id = "00000025-00000003" Acct-Status-Type = Interim-Update Acct-Authentic = RADIUS User-Name = "kiki33" NAS-Identifier = "AP-sarlanga4-4" NAS-Port = 2 Called-Station-Id = "00-1D-7E-DC-AA-FC:sarlanga-I" Calling-Station-Id = "70-F1-A1-8E-D6-95" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" Acct-Session-Time = 2700 Acct-Input-Packets = 4029 Acct-Output-Packets = 2046 Acct-Input-Octets = 564216 Acct-Output-Octets = 1393636 Event-Timestamp = "Dec 16 2011 09:49:57 ART" +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 2,Client-IP-Address = 192.168.45,NAS-IP-Address = 192.168.45,Acct-Session-Id = "00000025-00000003",User-Name = "kiki33"' [acct_unique] Acct-Unique-Session-ID = "7b9145a2626e818f". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "kiki33", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop +- entering group accounting {...} [detail] expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /usr/local/var/log/radius/radacct/192.168.45/detail-20111216 [detail] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.45/detail-20111216 [detail] expand: %t -> Fri Dec 16 09:49:57 2011 ++[detail] returns ok ++[unix] returns noop [radutmp] expand: /usr/local/var/log/radius/radutmp -> /usr/local/var/log/radius/radutmp [radutmp] expand: %{User-Name} -> kiki33 ++[radutmp] returns ok [attr_filter.accounting_response] expand: %{User-Name} -> kiki33 attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 48 to 192.168.45 port 55272 Finished request 11. Cleaning up request 11 ID 48 with timestamp +9 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 10.129.0.60 port 53194, id=247, length=195 Acct-Session-Id = "4EEB32C5-00000007" Acct-Status-Type = Interim-Update Acct-Authentic = RADIUS User-Name = "kiki" NAS-Identifier = "AP-Sociales-1" NAS-Port = 1 Called-Station-Id = "00-25-9C-13-FE-5E:sarlanga-I" Calling-Station-Id = "00-26-5E-43-22-92" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" Acct-Session-Time = 600 Acct-Input-Packets = 6460 Acct-Output-Packets = 7179 Acct-Input-Octets = 985546 Acct-Output-Octets = 6567171 Event-Timestamp = "Dec 16 2011 09:49:58 ART" +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 1,Client-IP-Address = 10.129.0.60,NAS-IP-Address = 10.129.0.60,Acct-Session-Id = "4EEB32C5-00000007",User-Name = "kiki"' [acct_unique] Acct-Unique-Session-ID = "53fddc991168b999". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "kiki", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop +- entering group accounting {...} [detail] expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /usr/local/var/log/radius/radacct/10.129.0.60/detail-20111216 [detail] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.129.0.60/detail-20111216 [detail] expand: %t -> Fri Dec 16 09:49:58 2011 ++[detail] returns ok ++[unix] returns noop [radutmp] expand: /usr/local/var/log/radius/radutmp -> /usr/local/var/log/radius/radutmp [radutmp] expand: %{User-Name} -> kiki ++[radutmp] returns ok [attr_filter.accounting_response] expand: %{User-Name} -> kiki attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 247 to 10.129.0.60 port 53194 Finished request 12. Cleaning up request 12 ID 247 with timestamp +10 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 192.168.2.53 port 49603, id=160, length=189 Acct-Session-Id = "00000025-0000000A" Acct-Status-Type = Interim-Update Acct-Authentic = RADIUS User-Name = "kiki333" NAS-Identifier = "UP-JJ-1" NAS-Port = 1 Called-Station-Id = "00-1D-7E-DC-AA-D8:sarlanga-I" Calling-Station-Id = "18-E7-F4-6E-02-E6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" Acct-Session-Time = 600 Acct-Input-Packets = 7808 Acct-Output-Packets = 4400 Acct-Input-Octets = 1053849 Acct-Output-Octets = 1392056 Event-Timestamp = "Dec 16 2011 09:50:00 ART" +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 1,Client-IP-Address = 192.168.2.53,NAS-IP-Address = 192.168.2.53,Acct-Session-Id = "00000025-0000000A",User-Name = "kiki333"' [acct_unique] Acct-Unique-Session-ID = "a10966e1e5dda57e". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "kiki333", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop +- entering group accounting {...} [detail] expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /usr/local/var/log/radius/radacct/192.168.2.53/detail-20111216 [detail] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.2.53/detail-20111216 [detail] expand: %t -> Fri Dec 16 09:50:00 2011 ++[detail] returns ok ++[unix] returns noop [radutmp] expand: /usr/local/var/log/radius/radutmp -> /usr/local/var/log/radius/radutmp [radutmp] expand: %{User-Name} -> kiki333 ++[radutmp] returns ok [attr_filter.accounting_response] expand: %{User-Name} -> kiki333 attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated Sending Accounting-Response of id 160 to 192.168.2.53 port 49603 Finished request 13. Cleaning up request 13 ID 160 with timestamp +12 Going to the next request Ready to process requests. rad_recv: Access-Request packet from host 192.168.4 port 39611, id=2, length=253 User-Name = "SOYKADORNA" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "02-00-00-00-00-01" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" EAP-Message = 0x0202007a198000000070160301006b0100006703014eeb3ec87be73aa918030263d5e73f349398bd48e8176a62ce944dcf0c6b95cf00003a00390038008800870035008400160013000a00330032009a009900450044002f00960041000500040015001200090014001100080006000300ff0100000400230000 State = 0x869e7309879c6a16768684a64fbb490b Message-Authenticator = 0x0786010bb78d36cc0a93b73a3a9b7a0f +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: %{Virtual-Server} -> [auth_log] expand: /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d -> /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] /usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{NAS-Identifier}-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d expands to /usr/local/var/log/radius/radacct/requests/192.168.4/auth-detail--DEFAULT-20111216 [auth_log] expand: %t -> Fri Dec 16 09:50:01 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "SOYKADORNA", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 122 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} rlm_eap: No EAP session matching the State variable. [eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request [eap] Failed in handler ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [SOYKADORNA] (from client AP-sarlanga7 port 0 cli 02-00-00-00-00-01) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> SOYKADORNA attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 14 for 1 seconds Going to the next request - -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com LPIC-2 Certified - http://www.lpi.org - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
