The big box of exclamation points talking about certificates in the debug log happens any time an EAP session does not complete all the way. It is not always a certificate problem, just if you are only having trouble with certain types of clients and other types connect fine, then that is a good place to look for trouble.
-----Original Message----- From: freeradius-users-bounces+bjulin=clarku....@lists.freeradius.org [mailto:freeradius-users-bounces+bjulin=clarku....@lists.freeradius.org] On Behalf Of Erick Rojas Bastidas Sent: Wednesday, December 21, 2011 10:48 AM To: freeradius-users@lists.freeradius.org Subject: RV: certificate compatibility I did certificates with xpextensions and install the CA cert in the client.. But the debug output of freeradius displays a warning of compatibility certificate.. This may be the problem?? Enviado desde mi dispositivo movil BlackBerry(r) de Digitel. -----Original Message----- From: erickj_roj...@hotmail.com Date: Wed, 21 Dec 2011 14:24:28 To: <freeradius-users@lists.freeradius.org> Reply-To: erickj_roj...@hotmail.com Subject: Acces-Accept, but connectivity is almost zero Hi all, thanks for your help! I have the CA certificate installed on the client, and freeradius -X responded with an 'Acces-Accept', but connectivity is almost zero, received packets are very few.. This could be due to problems of the certificate?? Enviado desde mi dispositivo movil BlackBerry(r) de Digitel. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
