Hey All,
Has anyone has any experience using freeradius with the dlink dws-3026
switch and dwl-3500aps? I can't see a way to configure anything on
them...no matter what i do the request shows up as the following.
rad_recv: Access-Request packet from host 192.170.140.6 port 1032,
id=0, length=160
User-Name = "00-1F-F3-BD-A4-4F"
User-Password = "NOPASSWORD"
NAS-IP-Address = 10.90.90.91
Called-Station-Id = "00-20-B0-EF-BA-F6:TEST"
Calling-Station-Id = "00-1F-F3-BD-A4-4F"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 11Mbps 802.11b"
Message-Authenticator = 0xfab0de5e78156ea21d1b56e3537472ff
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
Side note, no matter what, the AP has a dhcp assigned IP and most AP's
always show as that 10.90.90.x ip...
That's all i ever get from a wireless client...even when on a mac
using wpa2 and freeradius setup for ldap, username always shows as mac
address...is this a limitation of the dlink equipment or am i doing
something wrong? I am going with this is flakey dlink equipment and
making me want to go to cisco even more...
Any help would be appreciated, thanks.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
