>> > >> > examples from http://wiki.freeradius.org/Rlm_sqlcounter, but my > counter > >> > doesn't still increase.? What am I missing please. > >> > >> > >> Do you have accounting records for that user in radacct? > >> > > > > mmm. no Fajar, I have checked from mysql and do not have any record for > > service type= Framed-User. I only have record for service > type=NAS-Prompt-User. > > What could be the reason why accounting records are not captured in > radacct > > for a Framed-User? > > Does your NAS send accounting packets? >
Yes i found some accounting packets, but only for telnet logins users. My NAS is a Cisco 2960 switch. Feb 28 15:16:07.111: AAA/ACCT/EXEC(00000118): Queueing record is UPDATE Feb 28 15:16:07.111: AAA/ACCT(00000118): Sending periodic record type=EXEC user=pam Feb 28 15:16:07.111: AAA/ACCT(00000118): Accounting method=radius (RADIUS) Feb 28 15:16:07.111: RADIUS/ENCODE(00000118):Orig. component type = EXEC Feb 28 15:16:07.111: RADIUS(00000118): Config NAS IP: 0.0.0.0 Feb 28 15:16:07.111: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:07.111: RADIUS(00000118): Send Accounting-Request to 10.1.7.202:1813 id 1646/45, len 132 Feb 28 15:16:07.111: RADIUS(00000118): Started 5 sec timeout Feb 28 15:16:07.111: RADIUS: Received from id 1646/45 10.1.7.202:1813, Accounting-response, len 20 Feb 28 15:16:07.111: AAA/ACCT/EXEC(00000118): UPDATE protocol reply PASS Feb 28 15:16:07.111: AAA/ACCT(00000118): Resetting Periodic timer Feb 28 15:16:35.532: AAA/ACCT/HC(00000125): Update DOT1X/03194F10 Feb 28 15:16:35.532: AAA/ACCT/HC(00000125): DOT1X/03194F10 [pre-sess] (rx/tx) base 149953679/386909991 pre 150010061/386953971 c Feb 28 15:16:35.532: AAA/ACCT/HC(00000125): DOT1X/03194F10 [pre-sess] (rx/tx) adjusted, pre 56382/43980 call 0/0 Feb 28 15:16:35.532: AAA/ACCT/HC(00000125): Update DOT1X/03194F10 Feb 28 15:16:35.532: AAA/ACCT/HC(00000125): DOT1X/03194F10 [sess] (rx/tx) base 149953679/386909991 pre 150010061/386953971 call Feb 28 15:16:35.532: AAA/ACCT/HC(00000125): DOT1X/03194F10 [sess] (rx/tx) adjusted, pre 56382/43980 call 0/0 Feb 28 15:16:35.532: AAA/ACCT/HC(00000125): Deregister DOT1X/03194F10 Feb 28 15:16:35.540: AAA/ACCT/EVENT/(00000125): CALL STOP Feb 28 15:16:35.540: AAA/ACCT/CALL STOP(00000125): Sending stop requests Feb 28 15:16:35.540: AAA/ACCT(00000125): Send all stops Feb 28 15:16:35.540: AAA/ACCT/NET(00000125): STOP Feb 28 15:16:35.540: AAA/ACCT/NET(00000125): Method list not found Feb 28 15:16:35.540: AAA/ACCT(00000125): del node, session 293 Feb 28 15:16:35.540: AAA/ACCT/NET(00000125): free_rec, count 0 Feb 28 15:16:35.540: AAA/ACCT/NET(00000125) reccnt 0, csr TRUE, osr 0 Feb 28 15:16:35.540: AAA/ACCT/NET(00000125): Last rec in db, intf not enqueued Feb 28 15:16:36.530: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to down Feb 28 15:16:37.218: AAA/ACCT/HC(00000126): Register DOT1X/03194F10 0bit/s, assuming 100Mbit/s, poll every 5m 0s Feb 28 15:16:37.218: AAA/ACCT/HC(00000126): Update DOT1X/03194F10 Feb 28 15:16:37.218: AAA/ACCT/HC(00000126): DOT1X/03194F10 [init-sess] (rx/tx) base 150010061/386953971 pre 150010061/386953971 Feb 28 15:16:37.218: AAA/ACCT/HC(00000126): DOT1X/03194F10 [init-sess] (rx/tx) adjusted, pre 0/0 call 0/0 Feb 28 15:16:37.218: AAA/ACCT/EVENT/(00000126): CALL START Feb 28 15:16:37.218: Getting session id for NET(00000126) : db=3567CE4 Feb 28 15:16:37.218: AAA/ACCT(00000000): add node, session 294 Feb 28 15:16:37.218: AAA/ACCT/NET(00000126): add, count 1 Feb 28 15:16:37.218: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:37.411: %AUTHMGR-5-START: Starting 'dot1x' for client (001e.33d5.7a68) on Interface Fa0/9 AuditSessionID 0A01050400 Feb 28 15:16:38.535: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/9, changed state to up Feb 28 15:16:45.523: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:45.523: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:45.523: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:45.523: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:45.523: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/179, len 193 Feb 28 15:16:45.523: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:45.531: RADIUS: Received from id 1645/179 10.1.7.202:1812, Access-Challenge, len 76 Feb 28 15:16:45.531: RADIUS/DECODE: EAP-Message fragments, 6, total 6 bytes Feb 28 15:16:45.531: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:45.531: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:45.531: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:45.531: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:45.540: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/180, len 352 Feb 28 15:16:45.540: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:45.607: RADIUS: Received from id 1645/180 10.1.7.202:1812, Access-Challenge, len 1112 Feb 28 15:16:45.607: RADIUS/DECODE: EAP-Message fragments, 253+253+253+253+22, total 1034 bytes Feb 28 15:16:45.615: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:45.615: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:45.615: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:45.615: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:45.615: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/181, len 207 Feb 28 15:16:45.615: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:45.623: RADIUS: Received from id 1645/181 10.1.7.202:1812, Access-Challenge, len 842 Feb 28 15:16:45.623: RADIUS/DECODE: EAP-Message fragments, 253+253+253+7, total 766 bytes Feb 28 15:16:45.632: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:45.632: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:45.632: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:45.632: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:45.632: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/182, len 409 Feb 28 15:16:45.632: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:45.732: RADIUS: Received from id 1645/182 10.1.7.202:1812, Access-Challenge, len 135 Feb 28 15:16:45.732: RADIUS/DECODE: EAP-Message fragments, 65, total 65 bytes Feb 28 15:16:45.741: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:45.741: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:45.741: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:45.741: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:45.741: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/183, len 207 Feb 28 15:16:45.741: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:45.749: RADIUS: Received from id 1645/183 10.1.7.202:1812, Access-Challenge, len 113 Feb 28 15:16:45.749: RADIUS/DECODE: EAP-Message fragments, 43, total 43 bytes Feb 28 15:16:45.758: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:45.758: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:45.758: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:45.758: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:45.758: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/184, len 244 Feb 28 15:16:45.758: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:45.850: RADIUS: Received from id 1645/184 10.1.7.202:1812, Access-Challenge, len 129 Feb 28 15:16:45.850: RADIUS/DECODE: EAP-Message fragments, 59, total 59 bytes Feb 28 15:16:45.867: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:45.867: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:45.867: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:45.867: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:45.867: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/185, len 308 Feb 28 15:16:45.867: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:46.060: RADIUS: Received from id 1645/185 10.1.7.202:1812, Access-Challenge, len 161 Feb 28 15:16:46.060: RADIUS/DECODE: EAP-Message fragments, 91, total 91 bytes Feb 28 15:16:46.068: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:46.068: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:46.068: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:46.068: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:46.068: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/186, len 244 Feb 28 15:16:46.068: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:46.076: RADIUS: Received from id 1645/186 10.1.7.202:1812, Access-Challenge, len 113 Feb 28 15:16:46.076: RADIUS/DECODE: EAP-Message fragments, 43, total 43 bytes Feb 28 15:16:46.085: RADIUS/ENCODE(00000126):Orig. component type = DOT1X Feb 28 15:16:46.085: RADIUS(00000126): Config NAS IP: 0.0.0.0 Feb 28 15:16:46.085: Getting session id for DOT1X(00000126) : db=3567CE4 Feb 28 15:16:46.085: RADIUS/ENCODE: Best Local IP-Address 10.1.5.4 for Radius-Server 10.1.7.202 Feb 28 15:16:46.085: RADIUS(00000126): Send Access-Request to 10.1.7.202:1812 id 1645/187, len 244 Feb 28 15:16:46.085: RADIUS(00000126): Started 5 sec timeout Feb 28 15:16:46.177: RADIUS: Received from id 1645/187 10.1.7.202:1812, Access-Accept, len 180 Feb 28 15:16:46.177: RADIUS/DECODE: EAP-Message fragments, 4, total 4 bytes Feb 28 15:16:46.177: %DOT1X-5-SUCCESS: Authentication successful for client (001e.33d5.7a68) on Interface Fa0/9 AuditSessionID Feb 28 15:16:46.177: %AUTHMGR-7-RESULT: Authentication result 'success' from 'dot1x' for client (001e.33d5.7a68) on Interface Fa Feb 28 15:16:47.217: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (001e.33d5.7a68) on Interface Fa0/9 AuditSessionID 0 Feb 28 15:17:07.619: AAA/ACCT/EXEC(00000118): Queueing record is UPDATE Feb 28 15:17:07.619: AAA/ACCT(00000118): Sending periodic record type=EXEC user=pam Feb 28 15:17:07.619: AAA/ACCT(00000118): Accounting method=radius (RADIUS) Feb 28 15:17:07.619: RADIUS/ENCODE(00000118):Orig. component type = EXEC > > What does FR debug log shows like when it's receiving accounting packets? > Debug log from FR looks like below. I am not sure if it recieves accounting packets. Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.5.4:1645, id=186, length=244 User-Name = "clare" Service-Type = Framed-User Framed-MTU = 1500 Called-Station-Id = "EC-30-91-1D-69-89" Calling-Station-Id = "00-1E-33-D5-7A-68" EAP-Message = 0x0208002b19001703010020d06936f660c0fb15857fffd011a62ae19dfcc280b9bf19b74398bda313b99706 Message-Authenticator = 0x0064b79e63b6b1ad0add9398f8ba9751 Cisco-AVPair = "audit-session-id=0A0105040000011F08185C13" NAS-Port-Type = Ethernet NAS-Port = 50009 NAS-Port-Id = "FastEthernet0/9" State = 0x00f91a7e57066443fa1652468504ce18 NAS-IP-Address = 10.1.5.4 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 100 modcall[authorize]: module "preprocess" returns ok for request 100 modcall[authorize]: module "mschap" returns noop for request 100 rlm_realm: No '@' in User-Name = "clare", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 100 rlm_eap: EAP packet type response id 8 length 43 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 100 users: Matched entry clare at line 97 modcall[authorize]: module "files" returns ok for request 100 radius_xlat: 'clare' rlm_sql (sql): sql_set_user escaped user --> 'clare' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'clare' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 0 rlm_sql (sql): User clare not found in radcheck radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'clare' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'clare' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): User clare not found in radgroupcheck rlm_sql (sql): Released sql socket id: 0 rlm_sql (sql): User not found modcall[authorize]: module "sql" returns notfound for request 100 rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair modcall[authorize]: module "noresetcounter" returns noop for request 100 rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{User-Name}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'' radius_xlat: 'SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'' sqlcounter_expand: '%{sqlcca3:SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'}' WARNING: Attempt to use unknown xlat function, or non-existent attribute in string %{sqlcca3:SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'} radius_xlat: '' rlm_sqlcounter: (Check item - counter) is greater than zero rlm_sqlcounter: Authorized user clare, check_item=120, counter=0 rlm_sqlcounter: Sent Reply-Item for user clare, Type=Session-Timeout, value=120 modcall[authorize]: module "dailycounter" returns ok for request 100 modcall: leaving group authorize (returns updated) for request 100 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 100 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x020800061a03 PEAP: Setting User-Name to clare PEAP: Adding old state with 3b b3 PEAP: Sending tunneled request EAP-Message = 0x020800061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "clare" State = 0x3bb38a486193de91b9a05ac2529e2912 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 100 modcall[authorize]: module "preprocess" returns ok for request 100 modcall[authorize]: module "mschap" returns noop for request 100 rlm_realm: No '@' in User-Name = "clare", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 100 rlm_eap: EAP packet type response id 8 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 100 users: Matched entry clare at line 97 modcall[authorize]: module "files" returns ok for request 100 radius_xlat: 'clare' rlm_sql (sql): sql_set_user escaped user --> 'clare' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'clare' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): User clare not found in radcheck radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'clare' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'clare' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): User clare not found in radgroupcheck rlm_sql (sql): Released sql socket id: 4 rlm_sql (sql): User not found modcall[authorize]: module "sql" returns notfound for request 100 rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair modcall[authorize]: module "noresetcounter" returns noop for request 100 rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='%{User-Name}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'' radius_xlat: 'SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'' sqlcounter_expand: '%{sqlcca3:SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'}' WARNING: Attempt to use unknown xlat function, or non-existent attribute in string %{sqlcca3:SELECT SUM(AcctSessionTime - GREATEST((1330387200 - UNIX_TIMESTAMP(AcctStartTime)), 0)) FROM radacct WHERE UserName='clare' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '1330387200'} radius_xlat: '' rlm_sqlcounter: (Check item - counter) is greater than zero rlm_sqlcounter: Authorized user clare, check_item=120, counter=0 rlm_sqlcounter: Sent Reply-Item for user clare, Type=Session-Timeout, value=120 modcall[authorize]: module "dailycounter" returns ok for request 100 modcall: leaving group authorize (returns updated) for request 100 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 100 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 100 modcall: leaving group authenticate (returns ok) for request 100 Login OK: [clare] (from client localhost port 0) PEAP: Got tunneled reply RADIUS code 2 Service-Type = Framed-User Session-Timeout = 120 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "clare" PEAP: Processing from tunneled session code 0x9cec000 2 Service-Type = Framed-User Session-Timeout = 120 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "clare" PEAP: Tunneled authentication was successful. rlm_eap_peap: SUCCESS modcall[authenticate]: module "eap" returns handled for request 100 modcall: leaving group authenticate (returns handled) for request 100 Sending Access-Challenge of id 186 to 10.1.5.4 port 1645 Service-Type = Framed-User Session-Timeout = 120 EAP-Message = 0x0109002b19001703010020894b0248edb8c12721f80e332c6365548e99e020c086b8db7ed0a3d462d6dc37 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa91be12e67268f7d04712d947281391b Finished request 100 > >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html