Thank YOu Fajar: Thank you for ur advice,the problem soloved. the probelm is i forgot to set up the NAS's gateway IP address, so it still a two layer device,the request message could not get out of the device. Than k you very much Joey > Date: Sat, 17 Mar 2012 14:47:03 +0700 > Subject: Re: Any body here?Please help me to test my server. > From: l...@fajar.net > To: freeradius-users@lists.freeradius.org > > 2012/3/17 ZhenJoey <snan4l...@hotmail.com>: > > Hello every body: > > I just set up a freeradius server right now, > > Please help me to test it by run > > $radtest snan4love 123456 119.127.12.6 1812 12345678 > > I will be waiting here. > > > > BTW,i do a test my self via a NAS not radtest, it doesnt work. > > And what makes you think it will work when other test it? > > Don't be lazy. Do your own homework. > > Some things to check: > - make sure there's no firewall active in the server (e.g. make sure > iptables is disabled, or that the default rule is ACCEPT). It > simplifies things a lot. > - make sure the NAS can communicate with the radius serer (ping will > be a good start) > - run the server in debug mode (radiusd -X) > > If you need another host to run radtest, use virtualbox/kvm/whatever, > have it use bridged networking and assign the guest an IP address in > the same network segment as the host. > > -- > Fajar > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html