Hello, SQL is configured as long as I know, and actually before, when I had installed chillispot, I think it was working as I had values in my radacct table.
What should I check then, because the data is logged, at least part of it but in a file, not in the radacct table. Regards -----Original Message----- From: freeradius-users-bounces+fruiz002=hotmail....@lists.freeradius.org [mailto:freeradius-users-bounces+fruiz002=hotmail....@lists.freeradius.org] On Behalf Of Phil Mayers Sent: sábado, 24 de marzo de 2012 13:02 To: freeradius-users@lists.freeradius.org Subject: Re: FW: Radacct table not working properly On 03/23/2012 11:07 PM, Javier Ruiz Escalante wrote: > I have realized that my radius system does not record the logging > information in my radius Data base, in radacct table, but nevertheless > creates a folder in /var/log/freeradius for every NAS which is called > radacct inside this folder there is another folder with the ip of > the NAS and inside it there is a txt file with the info that I should > have "radacct" or "detail" file logging is configured by default in the server. SQL is not. Have you configured SQL accounting? > in the radacct table, furthermore I get the following error in radius debug: What error? There is no error. All you show is debug output from the server startup. There is no error. > > Module: Instantiating module "attr_filter.access_reject" from file > /etc/freeradius/modules/attr_filter > > attr_filter attr_filter.access_reject { > > attrsfile = "/etc/freeradius/attrs.access_reject" > > Any clue? Any clue about *what*? You need to ask better questions. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html