OK, that entry in the users file was in as part of the prebuild package. I will have to check why that is there with the guys that make the package. For the moment I have commented it out so that it truly reflects the config on your website.
I have been through the steps again and found that final radtest shows an access-reject and the debug shows: ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Now presumably this is because there is nothing in the users file (by putting the DEFAULT EAP-Message !* "", Auth-Type := Accept back the access-request is accepted). The website says to delete the previous test entry, so now I am left with nothing in the users file. Is this correct? Cheers, Andi -----Original Message----- From: freeradius-users-bounces+amorris=cardiffmet.ac...@lists.freeradius.org [mailto:freeradius-users-bounces+amorris=cardiffmet.ac...@lists.freeradius.org] On Behalf Of Alan DeKok Sent: 24 April 2012 12:41 To: FreeRadius users mailing list Subject: Re: falling back to local auth and not ads Morris, Andi wrote: > Great website! I've been through all the steps on that and I get an > Access-Accept when running the radtest against MSCHAP at the end, however > when I connect from a supplicant I'm still seeing the following in the debug > output. If you follow the instructions on the web site, then it will work. > The only thing in my users file is: > DEFAULT EAP-Message !* "", Auth-Type := Accept The web site does NOT say to do this. Do you understand what it does? It tries to bypass all authentication! Follow the web site. Don't do *more* changes than the web site says. It *will* work. The web site contains DETAILED descriptions of what to configure, what to test, and what to do when the tests don't work. It's clear you're *not* following the web site. If you were, you would be saying which step you tried, which ones worked, and which test failed. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ________________________________ From 1st November 2011 UWIC changed its title to Cardiff Metropolitan University. From the 6th December 2011, as part of this change, all email addresses which included @uwic.ac.uk have changed to @cardiffmet.ac.uk. All emails sent from Cardiff Metropolitan University will now be sent from the new @cardiffmet.ac.uk address. Please could you ensure that all of your contact records and databases are updated to reflect this change. Further information can be found on the website here.<http://www3.uwic.ac.uk/English/News/Pages/UWIC-Name-Change.aspx> Ar Dachwedd y 1af 2011 newidiodd UWIC ei henw i Brifysgol Fetropolitan Caerdydd. O Ragfyr 6ed, fel rhan o'r newid yma, bydd pob cyfeiriad e-bost sy'n cynnwys @uwic.ac.uk yn newid i @cardiffmet.ac.uk. Bydd yr holl ebyst a ddanfonir o Brifysgol Fetropolitan Caerdydd yn cael eu danfon o‘r cyfeiriad @cardiffmet.ac.uk newydd. Gwnewch yn siwr eich bod yn diweddaru eich cofnodion cyswllt a'ch cronfeydd data i adlewyrchu hyn. Gellir cael rhagor o wybodaeth ar y wefan yma.<http://www3.uwic.ac.uk/English/News/Pages/UWIC-Name-Change.aspx> - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
