Can you run lsof to see what process has the port open? On May 28, 2012 5:35 PM, "Michael Aldridge" <aldridge....@gmail.com> wrote:
> I recently had to install debian 6.0 on one of my servers after a hard > drive crash, and while I had freeradius running before, I can't seem to get > it running now. > > I ran sudo apt-get install freeradius and hit enter to accept the > additional packages, and I also installed dialup admin with the intention > of getting to it after getting freeradius running, but now I am running > into trouble with starting freeradius. The install completed without > errors, but running sudo ./freeradius -X produces the following: > > > Failed binding to authentication address * port 1812: Address already in > use > /etc/freeradius/radiusd.conf[240]: Error binding to port for 0.0.0.0 port > 1812 > > > I can post the full contents of the debug dump, but this appears to be the > only point at which an error is encountered. I am quite sure that there is > not an instance already running, so I don't know what else could be using > the port. Any ideas? > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html