I did check the wiki , i have been on it for the last 3 days trying to figure this out I did a search for Pool-Name and i got 4 different results as below http://wiki.freeradius.org/search?q=Pool-Name http://wiki.freeradius.org/Rlm_sqlippool http://wiki.freeradius.org/Rlm_ippool http://wiki.freeradius.org/Users http://wiki.freeradius.org/Ippool%20and%20radius%20clients I checked each one of them and not one said anything about radcheck or radreply. I checked on Google and found some pages that said TO USE Framed-Pool , and i could see that when i ran radiusd -XI just tried using Pool-Name and it doesnt work nor does it show when i try it with radiusd -X. I appreciate your input , im really stuck on this one. Im also not sure how to use rlm_sqlipool ? Taz > Date: Thu, 28 Jun 2012 19:08:25 +0700 > Subject: Re: FreeRADIUS SQl Ippool problem - > From: l...@fajar.net > To: dj...@iol.ie; freeradius-users@lists.freeradius.org > > On Thu, Jun 28, 2012 at 7:03 PM, Taz Manian <djta...@hotmail.com> wrote: > > Hi Guys, > > > > > > > > Im having a problem with Ippools with freeradius2 and i cant seem to get any > > username to get an address from the pool. > > > > 90% of the usernames will have static IP's but i want a few to be in a pool > > but i really am stumped - i tried putting > > > > > > > > username@realm Framed-Pool := EZPOOL > > > > > > > > into the radreply section and it gives me a reply when i test it # > > > Please check the wiki, IIRC you should put it in radcheck, not > radreply. And the attribute is Pool-Name, not Framed-Pool. > > > so i know is readying that - i then have a pool set up in radippool > > Also, IMHO you should just use rlm_sqlipool. It's easier to setup and debug. > > -- > Fajar > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
