I think i will try to upgrade the zonedirector and i will check again the
dynamic vlan
Thanks for the info
Date: Mon, 2 Jul 2012 14:56:35 +0200
Subject: Re: Freeradius and Zone Director
From: pmte...@gmail.com
To: freeradius-users@lists.freeradius.org
OK I'm reading from some release notes for FW 9.3. I'll paste here
In previous versions, ZoneDirector supported Dynamic VLAN only on WLANs
configured with 802.1X EAP, MAC Address, or 802.1X EAP + MAC Address
authentication. With this release, Dynamic VLAN support is extended to be
usable on WLANs configured with Open authentication and WPA/WPA2 and
Zero-IT/Dynamic PSK encryption methods.
In short, any type of WLAN that uses a RADIUS server for user authentication
can now be configured to receive Dynamic VLAN settings from the RADIUS server,
and clients can be dynamically segmented into different VLANs based on RADIUS
attributes.
Does that answer your question?
2012/7/2 Andrew Andonopoulos <andre8...@hotmail.com>
hi,
zone director details are:
Model ZD1106
Version 9.1.0.0 build 23
Date: Mon, 2 Jul 2012 11:54:26 +0200
Subject: Re: Freeradius and Zone Director
From: pmte...@gmail.com
To: freeradius-users@lists.freeradius.org
Hmm
If you are getting the success from testing then it should be ok. I've heard of
people testing various things with the ZD in regards to a RADIUS server and it
allways worked ok so I doubt that this would be a ZD issue.
Which FW are you using on the ZD?
2012/7/2 Andrew Andonopoulos <andre8...@hotmail.com>
hi and thanks for your reply
>From the zone director side i am using 802.1x Eap with WPA (in the Wlan
>section) and the dynamic vlan is enabled. The AP and the zonedirector are
>connected with the an Alied Telesis core switch and i am allowing all the
>vlans and the native. The only i can think is a authentication issue for
>example the zone director is using eap but maybe i need to change something to
>the freeradius to allow eap.
Also on the ruckus ZoneDirector the AAA server is configured correctly and when
i trying to test the username and password i am receiving a success message.
regards
Andrew
Date: Mon, 2 Jul 2012 11:06:41 +0200
Subject: Re: Freeradius and Zone Director
From: pmte...@gmail.com
To: freeradius-users@lists.freeradius.org
I'm more of an RuckusWireless specialist than an freeRADIUS, but I'll try to
help.
The ZD has a posibility of PAP or CHAP. Which Fw are you using?
The ZD and APs usualy work that if you have a trunk you also need a native
(untagged network) for them to communicate. You can also use a management VLAN
to manage all the devices. And it is also possible to use DHCP Option 43 for
dicovery and such.
Regards
2012/7/2 Andrew Andonopoulos <andre8...@hotmail.com>
Hello to all,
I have a problem with the freeradius and the Zonedirector. I am using MySql
tables to store the radrequest and radreply also the Nas tables. If i connect a
cat5 cable to the core switch i am getting an IP from the correct Vlan. If i
use the zone director i can't authenticate and get the correct ip. I read
somewhere that Ruckus Zonedirector is using chap and freeradius pap and chap
but i am not sure if that's the issue. The zonedirector and the Access points
are connected with trunk ports. I am wondering if someone faced the same
problem and give me some ideas.
RegardsAndrew
p.s attached file have the logs from the freeradius
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Primož Marinšek
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Primož Marinšek
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Primož Marinšek
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
