Hello, I've just installed freeradius 2.x on an ubuntu server 12.04 with apt-get.
I've follow documentation and I'm stuck on a very basic setup (pap auth). Basically I'm testing the default config using the users file to test auth with radtest. So, here is the thing: *users file - first line: teste Cleartext-Password:="teste"* I'm running freeradius on debug mode, here is the error log: rad_recv: Access-Request packet from host 127.0.0.1 port 38134, id=101, length=57 User-Name = "teste" User-Password = "teste" NAS-IP-Address = 201.x.x.x NAS-Port = 0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "teste", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry teste at line 1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group PAP {...} *[pap] login attempt with password "teste" [pap] No password configured for the user. Cannot do authentication* *++[pap] returns fail Failed to authenticate the user.* Login incorrect: [teste/teste] (from client localhost port 0) Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> teste attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated.... My radtest command: radtest teste teste 127.0.0.1 0 testing123 Ok, is that so obvious that I'm blind? Is there pap auth looking for another file instead users file? What am I missing? Thanks people.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html