BILLOT wrote:
> Is there any way to use virtual servs depending on client VLAN ?

  RADIUS is IP based, not VLAN based.  Packets don't arrive on different
VLANs.  They arrive on different IPs.

> I mean :
> 
> If packet arrive with VLAN1 then use virtual server 1
> If packet arrive with VLAN2 then use virtual server 2

  The server will have a different IP on each VLAN.  You can configure
different virtual servers per "listen" section.  See
raddb/sites-available/README

  Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to