I removed this line. Started up the server and I can see that the packets are being sent to the other server. However. I get...
> Detail listener /var/log/radius/radacct/relay-detail state running signalled > 0 waiting 1.094676 sec > Waking up in 0.9 seconds. > rad_recv: Accounting-Request packet from host 192.168.111.55 port 1814, > id=54, length=278 > Received Accounting-Request packet from client 192.168.111.55 with invalid > signature! (Shared secret is incorrect.) Dropping packet without response. > Going to the next request so the shared secret is wrong. But I have checked the secret on both sides and it is the same. What else could it be? I'm a little unclear on the remote server's client entry for this relay. Should it be the ip of the freeradius server or should it match the ip of the originating NAS? I have set up both to no avail. Bill On 10/2/2012 12:27 PM, Bill Schoolfield wrote: > To be clear, remove the line below??? > > virtual_server = copy-acct-to-home-server > > Does the "update control { Proxy-To-Realm := 'home_realm' } > section handle this association for us? > > Bill > > > On 10/2/2012 12:19 PM, Matthew Newton wrote: >> On Tue, Oct 02, 2012 at 11:37:31AM -0500, Bill Schoolfield wrote: >>> Here is what I added in proxy.conf: >> ... >>> home_server_pool poolit { >>> home_server = myhomeserver >>> virtual_server = copy-acct-to-home-server >> >> >> Remove the above line. Apart from that, looks OK to me. >> >> Matthew >> >> > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html