Hi Alan, Thanks for your reply.
Do you mean the below in the "users" file? cisco Auth-Type := LDAP Service-Type = Administrative-User, cisco-avpair = "shell:priv-lvl=15" Regards, /Neo On Thu, Jan 24, 2013 at 11:19 PM, <a.l.m.bu...@lboro.ac.uk> wrote: > Hi, > > you need whitspace before the service-type and cisco VSA lines after > your auth line (they are reply items.....not check items) - if you > run in debug mode (radiusd -X or freeradius -X on some distros) you can > confirm > from the output that the VSA/TLV are being sent to the client (switch). > > if they are, and you are stil being dumped on the basic prompt > then you need to revisit the cisco docs and ensure that you have > all the required AAA lines in place to allow admin/enable access > after login (ie if FreeRADIUS is sending the right stuff, then > its a NAS configuration issue) > > alan >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
