Hi,
Using freeradius2-2.1.12. I need to setup read-write access for both Cisco
NX-OS and IOS devices. I did the following,
DEFAULT Group == operator-rw, Auth-Type = System
Service-Type = NAS-Prompt-User,
cisco-avpair := "shell:roles*\"network-admin vdc-admin
priv-lvl=15\""
I can log into both NX-OS and IOS devices; however, IOS devices only
permits exec mode not the privileged exec (enable) mode. Not sure if I'm
doing something wrong on the syntax. Can someone give me few pointers?
Norman
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
