Dear people,
as you can see in this Access-Request:
rad_recv: Access-Request packet from host 10.1.4.82 port 65201, id=37,
length=79
User-Name = "test"
User-Password = "testpass"
NAS-IP-Address = 10.0.2.15
NAS-Port-Type = Virtual
NAS-Port = 1228
Calling-Station-Id = "10.0.2.15"
Service-Type = Login-User
the client is entering incorrect data into the field "Calling-Station-
Id".
In the setup used, it should not differ from the host.
But "10.0.2.15" != "10.1.4.82"
Authentication is handled by a perl-module.
The outcome of the module depends on the host sending the packet.
How (if at all) can I access the value of "host" (10.1.4.82 in the
example above) from within the perl-module?
Many thanks and best regards,
Wolfgang
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
