Great, i have run the debug and i did get the attribute required.
If i want to full fill the two conditions i.e username/passwd and Mac Address =
Attr-2352-145
How would i need to twick my radiusd.conf file to achieve this?
User-Name = "user2000@ut3"
CHAP-Password = "cccddd'"
CHAP-Challenge = "mmmm"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Identifier = "UT-BRAS-EDGE"
NAS-IP-Address = x.x.x.x
NAS-Port = 855649483
NAS_Real_Port = 855638816
NAS-Port-Type = Virtual
Attr-87 = "3/3 vlan-id 800 pppoe 11467"
Medium_Type = 11
Attr-2352-145 = "5c-7d-5e-3f-d0-f7" ==== MAC Address
Attr-2352-98 = "3"
Attr-2352-112 = "6.2.1.9"
Acct-Session-Id = "0202FFFF68008FC9-515D8419"
Eric M
________________________________
From: Mulindwa <meri...@yahoo.com>
To: Alan DeKok <al...@deployingradius.com>; FreeRadius users mailing list
<freeradius-users@lists.freeradius.org>
Sent: Thursday, April 4, 2013 4:58 PM
Subject: Re: MAC Address Auth
Thanks Alan,
Let me do so.
Eric M
________________________________
From: Alan DeKok <al...@deployingradius.com>
To: Mulindwa <meri...@yahoo.com>; FreeRadius users mailing list
<freeradius-users@lists.freeradius.org>
Sent: Thursday, April 4, 2013 4:47 PM
Subject: Re: MAC Address Auth
Mulindwa wrote:
> Hi All,
>
> Have been trying to authenticate my ADSL users using Mac Address Auth,
> however i have failed even after going through the documentation.
>
> I want to authenticate with the highlighted, anyone done this and can help?
It's been done.
> This is how the accounting file looks;
If you're trying to debug authentication, it helps to look at
*authentication* traffic, and not *accounting* data.
And run the server in debugging mode as suggested in the FAQ, "man"
page, web pages, and daily on this list.
Honestly, there is NO excuse for refusing to do this.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
