Thanks a lot Alan for the quick response and change again :-). The new fix works like charm :-). We see the 2 classifier in the same AVP.
Here is the packet capture: -------------------------------- AVP: l=125 t=Vendor-Specific(26) v=WiMAX(24757) VSA: l=119 t=WiMAX-Packet-Flow-Descriptor(28) C=0x00: 8 TLV(s) inside TLV: l=4 t=WiMAX-Packet-Data-Flow-Id(1): 111 WiMAX-Packet-Data-Flow-Id: 111 TLV: l=4 t=WiMAX-Service-Data-Flow-Id(2): 101 WiMAX-Service-Data-Flow-Id: 101 TLV: l=3 t=WiMAX-Direction(4): Uplink(1) WiMAX-Direction: Uplink (1) TLV: l=3 t=WiMAX-Activation-Trigger(5): 4 WiMAX-Activation-Trigger: 4 TLV: l=3 t=WiMAX-Transport-Type(6): IPv4-CS(1) WiMAX-Transport-Type: IPv4-CS (1) TLV: l=3 t=WiMAX-Uplink-QOS-Id(7): 111 WiMAX-Uplink-QOS-Id: 111 TLV: l=46 t=WiMAX-Uplink-Classifier(9): permit in ip src any dst any 0-66 priority 3 WiMAX-Uplink-Classifier: permit in ip src any dst any 0-66 priority 3 TLV: l=50 t=WiMAX-Uplink-Classifier(9): permit in ip src any dst any 69-65535 priority 3 WiMAX-Uplink-Classifier: permit in ip src any dst any 69-65535 priority 3 Thanks again for the great support - wish all other products have the same support response. -Hanu Alan DeKok wrote: > Whoops... that's a typo. Do a "git pull", and then another "make;make > install" > > You don't need to re-configure. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html