I have read many times the deployingradius.com guide, i have visit this site many times too. I'm no able to enable wpa_supplicant, but every test with radtest are good i have config freeradius for ldap.
I attach the debbug file radiusd -X I have take the file ca.pem in the validation asistan in gnome, i'm using ubuntu. What is wrong? Any idea? Thank you. PD: sorry about my bad inglish, it's posible that my bad english is the reason becouse i'm not able to configure freeradius properly. FreeRADIUS Version 2.1.12, for host x86_64-redhat-linux-gnu, built on Jan 9 2013 at 05:03:12 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.120.0/23 { require_message_authenticator = no secret = "test" shortname = "private-network-2" } client 192.168.202.252 { require_message_authenticator = no secret = "test" shortname = "ldap" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "escuelas" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap ldap { server = "ldap.server" port = 389 password = "passwd" identity = "domineUSer" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=Usuarios,dc=escuelassj" filter = "(uid=%u)" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes keepalive { interval = 3 } } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x2addb70564d0 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 52539 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=177, length=178 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x0201001401636c656d656e74652e626c616e6368 Message-Authenticator = 0x0be07d35efe547bae8a31bfa7dc9b644 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 20 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for clemente.blanch [ldap] expand: (uid=%u) -> (uid=clemente.blanch) [ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to 192.168.200.208:389, authentication 0 [ldap] bind as cn=root,dc=escuelassj/passwd to 192.168.200.208:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=Usuarios,dc=escuelassj, with filter (uid=clemente.blanch) [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0" [ldap] sambaNtPassword -> NT-Password == 0x3130363939383944313338324335343830464532353633374646303236314138 [ldap] sambaLmPassword -> LM-Password == 0x3836333231454630413134313242443441414433423433354235313430344545 [ldap] looking for reply items in directory... [ldap] user clemente.blanch authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 177 to 192.168.202.252 port 46850 EAP-Message = 0x01020016041029ef720b1fc4b5d33ad93db3b7440dd1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324302bd785bc66cf0b8940050 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=178, length=182 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020200060315 State = 0x4300b9324302bd785bc66cf0b8940050 Message-Authenticator = 0x85b25270b6ad4a02c4a441365de04f9b # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for clemente.blanch [ldap] expand: (uid=%u) -> (uid=clemente.blanch) [ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=Usuarios,dc=escuelassj, with filter (uid=clemente.blanch) [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0" [ldap] sambaNtPassword -> NT-Password == 0x3130363939383944313338324335343830464532353633374646303236314138 [ldap] sambaLmPassword -> LM-Password == 0x3836333231454630413134313242443441414433423433354235313430344545 [ldap] looking for reply items in directory... [ldap] user clemente.blanch authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/ttls [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 178 to 192.168.202.252 port 46850 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324203ac785bc66cf0b8940050 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=179, length=403 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020300e3150016030100d8010000d4030151a7502728b223adfd9d1576a726a7311af75bde6d41eb7f51784e34c0cbadf0000066c014c00ac022c0210039003800880087c00fc00500350084c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032009a009900450044c00ec004002f00960041c011c007c00cc002000500040015001200090014001100080006000300ff01000045000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011000f000101 State = 0x4300b9324203ac785bc66cf0b8940050 Message-Authenticator = 0xd439255984d72e6b31e8784decf1ff44 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 227 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] eaptls_verify returned 7 [ttls] Done initial handshake [ttls] (other): before/accept initialization [ttls] TLS_accept: before/accept initialization [ttls] <<< TLS 1.0 Handshake [length 00d8], ClientHello [ttls] TLS_accept: SSLv3 read client hello A [ttls] >>> TLS 1.0 Handshake [length 0031], ServerHello [ttls] TLS_accept: SSLv3 write server hello A [ttls] >>> TLS 1.0 Handshake [length 0855], Certificate [ttls] TLS_accept: SSLv3 write certificate A [ttls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [ttls] TLS_accept: SSLv3 write key exchange A [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [ttls] TLS_accept: SSLv3 write server done A [ttls] TLS_accept: SSLv3 flush data [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 179 to 192.168.202.252 port 46850 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa5308204a130820389a00302 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324104ac785bc66cf0b8940050 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.202.252 port 46850, id=180, length=182 User-Name = "clemente.blanch" NAS-IP-Address = 192.168.202.252 NAS-Port = 2049 Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius" Calling-Station-Id = "4C-ED-DE-2C-9C-B2" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020400061500 State = 0x4300b9324104ac785bc66cf0b8940050 Message-Authenticator = 0xe55d4634e860825f7eed8857971a2223 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...}/ [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] Received TLS ACK [ttls] ACK handshake fragment handler [ttls] eaptls_verify returned 1 [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 180 to 192.168.202.252 port 46850 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x83f82d312c7744ab946edc5e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4300b9324005ac785bc66cf0b8940050 Finished request 3. -- -- Un saludo. ____________________ Roberto Ortega - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html