On 07.08.2013 08:51, Dominique Frise wrote: > Did a fresh install from > http://github.com/FreeRADIUS/freeradius-server/tree/v2.x.x > > ./radiusd -v > radiusd: FreeRADIUS Version 2.2.1 (git #12be9f6), for host > x86_64-unknown-linux-gnu, built on Aug 6 2013 at 21:51:33 > Copyright (C) 1999-2013 The FreeRADIUS server project and contributors. > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > PARTICULAR PURPOSE. > You may redistribute copies of FreeRADIUS under the terms of the > GNU General Public License. > For more information about these matters, see the file named COPYRIGHT. > > But still no luck :-( > --------------------- > rad_recv: Access-Challenge packet from host X.X.X.X port 1812, id=101, > length=49 > Reply-Message = "Enter OTP:" > State = 0x38373131 > Prompt = No-Echo > Proxy-State = 0x313039 > # Executing section post-proxy from file > /usr/local/etc/raddb/sites-enabled/default > +- entering group post-proxy {...} > [eap] No pre-existing handler found > ++[eap] returns noop > ++? if (Response-Packet-Type == Access-Challenge) > ? Evaluating (Response-Packet-Type == Access-Challenge) -> FALSE > ----------------------
I made myself a test with the latest git HEAD (3.0) and indeed, this also doesn't work. I'll have a look at it and see why it doesn't call the paircmp callback. Olivier -- Olivier Beytrison Network & Security Engineer, HES-SO Fribourg Mail: oliv...@heliosnet.org - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html