Ian, My apologies for not following up sooner. Where you able to get past this issue? I just got my hands on a NxtVox TDM400 compatible card so I will hopefully be playing with it soon. I'm sure that what you are trying to do is not at all unusual and should be easily accomplished with the correct setup. I will work to get that setup properly documented.
-MC On Wed, Aug 6, 2008 at 4:50 AM, Ian Henderson <[EMAIL PROTECTED]> wrote: > Hi, > I'm tearing my hair out trying to get an inbound FXO call to bridge to a > SIP extension. > My setup is: > Zapmicro ZMA400P (TDM400P equivalent). > Cisco 7940 with SIP firmware > FS 1.0.1 + zaptel 1.4.11 > > I'm able to make calls out from various SIP extensions via the ZMA400P FXO, > however I can't get inbound calls to cause the SIP extension to ring and > acknowledge the call. > > In variations of the dialplan I can get a delay_echo to work for the > inbound call; The sample config for Local Extension will appear to transfer > the call to the extension, but the extension doesn't ring; however after 30 > seconds, the call diverts to voicemail successfully. > > I've tried transfers, bridging; default and public profiles with no > success. I've been through the wiki. Does anyone have a sample dialplan, > or the tricks to get FXO-to-extensions to work? > > thanks in advance, > Ian. > > > -- > Be Yourself @ mail.com! > Choose From 200+ Email Addresses > Get a Free Account at www.mail.com > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
