you just put the tone_detect app right before the bridge app you might have to also execute pre_answer to get an early media stream up into FS
On Tue, Sep 2, 2008 at 5:23 PM, Luis F Urrea <[EMAIL PROTECTED]> wrote: > Anthony, > > So far I haven't been able to used the tone_detect app with hangup when it > involves a phone ringing, Could you provide an example of a dialplan rule > that I could test. > > TIA > > > On Tue, Sep 2, 2008 at 4:18 PM, Luis F Urrea <[EMAIL PROTECTED]> wrote: > >> I understand that tone based disconnect could be subject to false >> disconnects in some cases, being dependent on the integrity of the analog >> signal and the proper configuration of tones, however I do feel that the >> feature is worth the effort, considering how difficult it is to get a Telco >> to arrange changes of settings on analog lines and being a last resort for >> this kind of situation. >> >> I do know however that this feature is implemented for example on Cisco >> IOS for analog gateways, Audiocodes gateways and Patton gateways. >> >> Cisco IOS and Patton requires one to specify the frequencies and cadence >> of the tone, Audiocodes provides an application that records the call >> progress tones and then analyzes the recorded busy signal to be used as the >> disconnect signal. >> >> I used to work at Cisco TAC supporting H323 analog and digital gateways, >> and in my experience the feature certainly saved the day in many cases after >> the customer was frustrated in trying to find out what his/her provider >> implemented on the line. >> >> My vote goes for it! >> >> >> >> On Tue, Sep 2, 2008 at 1:05 PM, Michael Jerris <[EMAIL PROTECTED]> wrote: >> >>> We do have the following patch almost ready to merge: >>> >>> http://jira.freeswitch.org/browse/OPENZAP-3 >>> >>> it could probably be expanded to work for other tones than dtmf, with >>> the caveats described by tony. >>> >>> Mike >>> >>> On Sep 2, 2008, at 2:22 PM, Anthony Minessale wrote: >>> >>> > Any method besides the tone based ones are supported by whichever IO >>> > layer you choose. >>> > For instance if you are using the zt mod (zaptel) then all the low >>> > level analog signalling will be generated by zaptel for ground loop >>> > and kewl start etc. >>> > >>> > Tone based hangup detection is a higher level concept that could be >>> > implemented in the core of openzap but would require constant tone >>> > detection throughout the call and is susceptible to false positives >>> > etc. >>> > >>> > it's not a common feature where I wrote the code from. I have >>> > kewlstart lines here and nobody has asked for it and I don't have a >>> > labbed up example and I only have 2 hands therefore it's not >>> > implemented. >>> > >>> > Like I said using tone_detect in FreeSWITCH with action hangup is >>> > not any more or less glorious than how the feature would work right >>> > in openzap so you can use it that way if you want. >>> > >>> >>> >>> _______________________________________________ >>> Freeswitch-users mailing list >>> [email protected] >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >>> >> >> > > _______________________________________________ > Freeswitch-users mailing list > [email protected] > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:[EMAIL PROTECTED] <[EMAIL PROTECTED]> GTALK/JABBER/PAYPAL:[EMAIL PROTECTED]<[EMAIL PROTECTED]> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:[EMAIL PROTECTED] <[EMAIL PROTECTED]> iax:[EMAIL PROTECTED]/888 googletalk:[EMAIL PROTECTED]<[EMAIL PROTECTED]> pstn:213-799-1400
_______________________________________________ Freeswitch-users mailing list [email protected] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
