I've been doing a lot of work recently with FreeSWITCH's mod_event_socket, and I wanted to comment a bit about the syntax used for commands through the socket while using asynchronous mode. I haven't tried the synchronous mode yet, as I always want to be free to be able to execute commands without waiting for other commands to finish. For instance, I need to be able to collect DTMF events while I'm playing a sound file, so that the user can do things like select menu items without listening to the entire menu first.
Asterisk's AMI protocol allows you to specify an ActionID along with every command that you send. Asterisk then includes this ActionID with every event that is related to that command, making it cake to coordinate an asynchronous client. However, even in async mode, FreeSWITCH's mod_event_socket doesn't communicate any identifying information for command responses, or for events triggered by a previous command, unless one uses the bgapi command set. This command set is not applicable to every situation, though. It only applies to commands which manipulate the call; if one needs to manipulate the channel, then messages must be used through the sendmsg command set, which doesn't provide any specific identifying information. Now, to complicate things, with all commands (even bgapi) the protocol works something like this: you send a command, and wait for a response from mod_event_socket. This response is assumed to be immediate before anything else the client might receive from mod_event_socket, and in the case of bgapi, this response will contain a job-id to use for comparing job-related events later. For example, for the following command: sendmsg call-command: execute execute-app-name: answer\n\n The response is this: Content-Type: command/reply Reply-Text: +OK That response is generic to nearly every single command sent, and is only really saying "The last transmission was a valid command, and didn't immediately fail". The command may actually fail later, and command specific feedback is generally contained in later events (which have no unique identifying information). My issue here is that this seems to be forcing an asynchronous client to rely upon a synchronous ordering of response directly following command, thus violating the very concepts of an asynchronous protocol in which there should be no assumed order. Not only that, but this method increases the complexity of a client, which must be aware of limitations that wouldn't ordinarily be required by a true asynchronous protocol. An asynchronous client should be unconcerned with listening for a synchronous response to every command. My suggested solution is to apply the job-id concept from bgapi to messages as well, and to go a step further; borrow the Asterisk idea of transmitting an identifier along with each command. Every response and event related to that command should then contain the very same identifier in the header.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org