A few thing stuck out to me ... Mainly 50 calls and transcoding speex. Try it again with g711 and see how you go.
Also not sure windows 7 is going to perform as good as other options, could be wrong though . Jay On 17/09/2009, at 3:56, Роберт Тверитнер <siniy...@gmail.com> wrote: > Hi guys! > > I've tested FreeSWITCH conference module performance trying to > figure out maximum number of simultaneous calls my FS box can serve. > It took all 100% of CPU with only 50 calls (in average depending on > conference rate) and "leaking stream handle" messages started > appearing. > > The environment I was testing in: > OS - Windows Server 2007 SP1 64 Bit > CPU - Dual-core AMD Opteron 1216 HE 2.4 GHz > RAM - 2 GB > FreeSwitch version 1.0.4 (14460) > > I've written a test program that used to originate calls once in 5 > seconds from the other box. These calls were routed to particular > conference room I was testing. I had a number of rooms with > different rate (8000-32000) and interval (20,30) settings and with > perpetual-sound turned on steraming music continiously. I've > switched off all unnecessary modules, but left logging on in order > to trace what was happening later. Client test softphone used > respective speex codec according to conference room rate. > > This is a dialplan I used: > <extension name="test_conference"> > <condition field="destination_number" expression="^ > (800020)$" break="on-true"> > <action application="conference" data="$...@default20"/> > </condition> > <condition field="destination_number" expression="^ > (800030)$" break="on-true"> > <action application="conference" data="$...@default30"/> > </condition> > <condition field="destination_number" expression="^ > (1600020)$" break="on-true"> > <action application="conference" data="$...@wideband20"/> > </condition> > <condition field="destination_number" expression="^ > (1600030)$" break="on-true"> > <action application="conference" data="$...@wideband30"/> > </condition> > <condition field="destination_number" expression="^ > (3200020)$" break="on-true"> > <action application="conference" > data="$...@ultrawideband20"/> > </condition> > <condition field="destination_number" expression="^ > (3200030)$" break="on-true"> > <action application="conference" > data="$...@ultrawideband30"/> > </condition> > </extension> > > My questions are: > Do you know any way I can increase my FS conference capacity? What > do I have to tune in FS or in my box? > > Best regards, Robert. > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- > users > http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org