Hi, I am trying to setup a Digium TDM400P following the instruction on the wiki. It is a 1 fxo and 1 fxs card, so I tried loadzone=in defaultzone=in fxsks=2 fxoks=1
and loadzone=in defaultzone=in fxsks=1 fxoks=2 None works. Does anyone know how it should be configured? Here is what I get by following the wiki. [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart [r...@localhost zaptel]# ztcfg -vv Zaptel Version: SVN-branch-1.4-r4629M Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels to configure. Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart [r...@localhost zaptel]# lspci 00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11)
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
