Thanks Anthony that did the trick !
Excuse my ignorance - this is all new to me . . . It would help if I knew what I was doing, as I commented below, I copied the <action application="set" data="hangup_after_bridge=true"/> <action application="set" data="continue_on_fail=true"/> from the code for the default extensions (in the wrong order though obviously), without understanding what they were there for ! I've just stumbled across the Wiki page http://wiki.freeswitch.org/wiki/Extension_Status_Example - hopefully, I understand now regards Dave ----- Original Message ----- From: Anthony Minessale To: freeswitch-users@lists.freeswitch.org Sent: Tuesday, November 10, 2009 12:29 AM Subject: Re: [Freeswitch-users] DIalplan logic You set both hangup_after_bridge and continue_on_fail after you already called bridge. Try setting it *before* Seems to be a running theme here that things will be parsed in a linear fashion that you may want to take note of. On Mon, Nov 9, 2009 at 6:18 PM, Dave Stevenson <steve...@primrosebank.net> wrote: Well, I thought it was fixed - it is more or less working, with one more stumbling block. I have just posted a dump to the pastebin - from Dave (stevendt) The voice mail works - but too well. If the call is answered by a someone at this end - everything is fine until the user hangs up, then the remote party gets the voicemail messages.# Is there something else wrong with the dialplan logic below ? regards Dave ----- Original Message ----- From: Dave Stevenson To: freeswitch-users@lists.freeswitch.org Sent: Monday, November 09, 2009 11:52 PM Subject: Re: [Freeswitch-users] DIalplan logic Michael, thanks a lot - it's fixed...... you spotted exactly what the problem was ! <condition field="destination_number" expression="^(100)$"> <action application="voicemail" data="default ${domain_name} ${dialed_extension}"/> regards Dave ----- Original Message ----- From: Michael Collins To: freeswitch-users@lists.freeswitch.org Sent: Monday, November 09, 2009 11:26 PM Subject: Re: [Freeswitch-users] DIalplan logic See comment inline On Mon, Nov 9, 2009 at 2:56 PM, Dave Stevenson <steve...@primrosebank.net> wrote: Hi Guys, OK, with the RegEx help that you gave me, I have separated out the processing of extension 100 from 101 to 399 as I wanted. I have created a group (100) which contains a number of phones - 101 to 105 at the moment. When the PSTN line rings, I want all the extensions in the group to ring - that's the easy bit (I think - it's a copy of extension 2000 code) <extension name="group_dial_primrose"> <condition field="destination_number" expression="^100$"> <action application="bridge" data="${group_call(primr...@${domain_name})}"/> </condition> </extension> That's fine and the nominated phones all ring. I'm struggling to get it to do what I want when some doesn't pick up though. All extensions ring as required, but their own dialplan entries (copies of the 1001 to 1005 code in the default dialplan) don't answer the call. That's fine, as you would not want every extension's voice mail to kick in. What I want to happen is for extension 100's voice mail to kick in after a time delay. So, get the dialed exetension number so that I can point at the right mailbox <action application="set" data="dialed_extension=$1"/> set the timeout for the call <action application="set" data="call_timeout=20"/> Added these lines - but don't know why - they are in the default extension code ????? <action application="set" data="hangup_after_bridge=true"/> <action application="set" data="continue_on_fail=true"/> <action application="answer"/> then go to voice mail on 100 <action application="sleep" data="1000"/> <action application="voicemail" data="default ${domain_name}{dialed_extension}"/> giving <extension name="group_dial_primrose"> The following line needs to have 100 in parens like this: "^(100)$" because that's how you get $1 to be populated. <condition field="destination_number" expression="^100$"> <action application="set" data="dialed_extension=$1"/> <action application="set" data="call_timeout=20"/> <action application="bridge" data="${group_call(primr...@${domain_name})}"/> <action application="set" data="hangup_after_bridge=true"/> <action application="set" data="continue_on_fail=true"/> <action application="answer"/> <action application="sleep" data="1000"/> I think this might be a typo? Shouldn't this next line be ... data="default ${domain_name} ${dialed_extension}" <action application="voicemail" data="default ${domain_name}{dialed_extension}"/> </condition> </extension> The voicemail kicks in, and prompts are correct (although the extension name is not spoken) but the wav file is saved in the 1001 directory not 100 and neither extension 100 or 1001 think that have any voice mail messages. Can someone help please ? Where am i going wrong ? Make those changes, reloadxml, and then try again. Be sure to capture a debug log if it doesn't work and put that log in pastebin.freeswitch.org. -MC ------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -------------------------------------------------------------------------- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_miness...@hotmail.com GTALK/JABBER/PAYPAL:anthony.miness...@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:8...@conference.freeswitch.org iax:gu...@conference.freeswitch.org/888 googletalk:conf+...@conference.freeswitch.org pstn:213-799-1400 ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
