Looks good so far. Try "oz list" and "oz dump 1" and see what happens. -MC
On Thu, Dec 3, 2009 at 10:36 PM, Neil Patel <ne...@cs.stanford.edu> wrote: > Thanks all for your help. I got around this by running ./Setup and > installing wanpipe in TDM API mode (it says it's the default for FS). I then > uncommented the mod_openzap line in modules.conf when installing FS. Finally > I ran wancfg_fs which creates appropriate config files for you for your FS > installation. I believe openzap is now installed properly: > > 2009-12-04 12:04:52.411017 [INFO] zap_io.c:2451 Loading IO from > /usr/local/freeswitch/mod/ozmod_wanpipe.so [wanpipe] > 2009-12-04 12:04:52.411126 [INFO] zap_io.c:2251 auto-loaded 'wanpipe' > 2009-12-04 12:04:52.411311 [INFO] ozmod_wanpipe.c:287 configuring device > s1c1 as OpenZAP device 1:1 fd:14 DTMF: software > 2009-12-04 12:04:52.411377 [INFO] ozmod_wanpipe.c:287 configuring device > s1c2 as OpenZAP device 1:2 fd:15 DTMF: software > 2009-12-04 12:04:52.411444 [INFO] ozmod_wanpipe.c:287 configuring device > s1c3 as OpenZAP device 1:3 fd:17 DTMF: software > 2009-12-04 12:04:52.411509 [INFO] ozmod_wanpipe.c:287 configuring device > s1c4 as OpenZAP device 1:4 fd:18 DTMF: software > 2009-12-04 12:04:52.411575 [INFO] ozmod_wanpipe.c:287 configuring device > s1c5 as OpenZAP device 1:5 fd:19 DTMF: software > 2009-12-04 12:04:52.411639 [INFO] ozmod_wanpipe.c:287 configuring device > s1c6 as OpenZAP device 1:6 fd:20 DTMF: software > 2009-12-04 12:04:52.411707 [INFO] ozmod_wanpipe.c:287 configuring device > s1c7 as OpenZAP device 1:7 fd:21 DTMF: software > 2009-12-04 12:04:52.411771 [INFO] ozmod_wanpipe.c:287 configuring device > s1c8 as OpenZAP device 1:8 fd:22 DTMF: software > 2009-12-04 12:04:52.411837 [INFO] ozmod_wanpipe.c:287 configuring device > s1c9 as OpenZAP device 1:9 fd:23 DTMF: software > 2009-12-04 12:04:52.411903 [INFO] ozmod_wanpipe.c:287 configuring device > s1c10 as OpenZAP device 1:10 fd:24 DTMF: software > 2009-12-04 12:04:52.411969 [INFO] ozmod_wanpipe.c:287 configuring device > s1c11 as OpenZAP device 1:11 fd:25 DTMF: software > 2009-12-04 12:04:52.412034 [INFO] ozmod_wanpipe.c:287 configuring device > s1c12 as OpenZAP device 1:12 fd:26 DTMF: software > 2009-12-04 12:04:52.412102 [INFO] ozmod_wanpipe.c:287 configuring device > s1c13 as OpenZAP device 1:13 fd:27 DTMF: software > 2009-12-04 12:04:52.412179 [INFO] ozmod_wanpipe.c:287 configuring device > s1c14 as OpenZAP device 1:14 fd:28 DTMF: software > 2009-12-04 12:04:52.412244 [INFO] ozmod_wanpipe.c:287 configuring device > s1c15 as OpenZAP device 1:15 fd:29 DTMF: software > TDM API: CMD: 18 > : Operation not supported > 2009-12-04 12:04:52.412416 [INFO] ozmod_wanpipe.c:287 configuring device > s1c16 as OpenZAP device 1:16 fd:30 DTMF: none > 2009-12-04 12:04:52.412503 [INFO] ozmod_wanpipe.c:287 configuring device > s1c17 as OpenZAP device 1:17 fd:31 DTMF: software > 2009-12-04 12:04:52.412568 [INFO] ozmod_wanpipe.c:287 configuring device > s1c18 as OpenZAP device 1:18 fd:32 DTMF: software > 2009-12-04 12:04:52.412634 [INFO] ozmod_wanpipe.c:287 configuring device > s1c19 as OpenZAP device 1:19 fd:33 DTMF: software > 2009-12-04 12:04:52.412708 [INFO] ozmod_wanpipe.c:287 configuring device > s1c20 as OpenZAP device 1:20 fd:34 DTMF: software > 2009-12-04 12:04:52.412771 [INFO] ozmod_wanpipe.c:287 configuring device > s1c21 as OpenZAP device 1:21 fd:35 DTMF: software > 2009-12-04 12:04:52.412838 [INFO] ozmod_wanpipe.c:287 configuring device > s1c22 as OpenZAP device 1:22 fd:36 DTMF: software > 2009-12-04 12:04:52.412902 [INFO] ozmod_wanpipe.c:287 configuring device > s1c23 as OpenZAP device 1:23 fd:37 DTMF: software > 2009-12-04 12:04:52.412948 [INFO] ozmod_wanpipe.c:287 configuring device > s1c24 as OpenZAP device 1:24 fd:38 DTMF: software > 2009-12-04 12:04:52.412988 [INFO] ozmod_wanpipe.c:287 configuring device > s1c25 as OpenZAP device 1:25 fd:39 DTMF: software > 2009-12-04 12:04:52.413018 [INFO] ozmod_wanpipe.c:287 configuring device > s1c26 as OpenZAP device 1:26 fd:40 DTMF: software > 2009-12-04 12:04:52.413041 [INFO] ozmod_wanpipe.c:287 configuring device > s1c27 as OpenZAP device 1:27 fd:41 DTMF: software > 2009-12-04 12:04:52.413063 [INFO] ozmod_wanpipe.c:287 configuring device > s1c28 as OpenZAP device 1:28 fd:42 DTMF: software > 2009-12-04 12:04:52.413086 [INFO] ozmod_wanpipe.c:287 configuring device > s1c29 as OpenZAP device 1:29 fd:43 DTMF: software > 2009-12-04 12:04:52.413106 [INFO] ozmod_wanpipe.c:287 configuring device > s1c30 as OpenZAP device 1:30 fd:44 DTMF: software > 2009-12-04 12:04:52.413128 [INFO] ozmod_wanpipe.c:287 configuring device > s1c31 as OpenZAP device 1:31 fd:45 DTMF: software > 2009-12-04 12:04:52.413142 [INFO] zap_io.c:2374 Configured 31 channel(s) > 2009-12-04 12:04:52.431405 [INFO] zap_io.c:2468 Loading SIG from > /usr/local/freeswitch/mod/ozmod_ss7_boost.so > 2009-12-04 12:04:52.431441 [INFO] zap_io.c:2584 auto-loaded 'ss7_boost' > 2009-12-04 12:04:52.431541 [CONSOLE] switch_loadable_module.c:889 > Successfully Loaded [mod_openzap] > 2009-12-04 12:04:52.431553 [NOTICE] switch_loadable_module.c:142 Adding > Endpoint 'openzap' > 2009-12-04 12:04:52.431638 [NOTICE] switch_loadable_module.c:248 Adding > Application 'disable_ec' > 2009-12-04 12:04:52.431659 [NOTICE] switch_loadable_module.c:270 Adding API > Function 'oz' > 2009-12-04 12:04:52.432009 [WARNING] ss7_boost_client.c:244 TX EVENT (P): > SYSTEM_RESTART:(87) [w1g1] Rc=0 CSid=0 Seq=0 > > > Does this look right? > Thanks. > > On Mon, Nov 30, 2009 at 9:09 PM, Moises Silva <moises.si...@gmail.com>wrote: > >> On Mon, Nov 30, 2009 at 4:49 AM, Neil Patel <ne...@cs.stanford.edu>wrote: >> >>> Hi All, >>> >>> I am currently installing a Sangoma A102 card to work with FS using >>> wanpipe drivers (OS = Ubuntu Jaunty). The problem is I can't get >>> openzap-related modules to compile: >>> >>> > cd wanpipe-3.5.6.5/ >>> > make openzap >>> ... >>> make[2]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libsangoma' >>> make[1]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libsangoma' >>> make -C api/libstelephony clean >>> make[1]: Entering directory `/usr/src/wanpipe-3.5.6.5/api/libstelephony' >>> make[1]: *** No rule to make target `clean'. Stop. >>> make[1]: Leaving directory `/usr/src/wanpipe-3.5.6.5/api/libstelephony' >>> make: *** [all_lib] Error 2 >>> >>> The libstelephony directory has no Makefile in it. Why is it missing? Is >>> there a version of wanpipe drivers that will work? I have been unsuccessful >>> with 3.4.4 and 3.5.6 in similar fashion. >>> >>> >> Hi Neil, >> >> Most likely the creation of the Makefile failed (since you mention you >> can't see a Makefile). Please be sure to have installed the pre-requisites >> listed at http://wiki.sangoma.com/Requirements >> >> Particularly in this case, libtool, autoconf and automake packages. >> >> -- >> Moises Silva >> Software Developer >> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R >> 9T3 Canada >> t. 1 905 474 1990 x 128 | e. m...@sangoma.com >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org