Yes, the internal profile exists.
Name Type Data
State
============================================================================
=====================
internal profile sip:[email protected]:5060
RUNNING (0)
internal-ipv6 profile sip:mod_so...@[::1]:5060
RUNNING (0)
external profile sip:[email protected]:5080
RUNNING (0)
example.com gateway sip:[email protected]
NOREG
192.168.10.25 alias internal
ALIASED
============================================================================
=====================
3 profiles 1 alias
From: [email protected]
[mailto:[email protected]] On Behalf Of Michael
Collins
Sent: Tuesday, December 22, 2009 11:15 AM
To: [email protected]
Subject: Re: [Freeswitch-users] Freeswitch not seeing Register requests
On Tue, Dec 22, 2009 at 10:50 AM, Larry Marshall <[email protected]> wrote:
I have set up a second FreeSWITCH box on the same LAN. I have v16018
installed on it and have changed nothing.
I configured a Polycom phone to register one of its four lines to this
second box, but it does not register. When looking at the console, there is
no activity. However, there is SIP activity on the box which I have captured
via ngrep. It looks like the phone is sending out REGISTER requests but
there is no response. The request on the pastebin repeats forever, with only
the timestamp varying.
On the new box do "sofia status" - does the internal profile exist?
Is the problem that there are two FreeSWITCHes? Any suggestions on how I can
make it work?
On the original and the new box in vars.xml
"external_sip_ip=stun:stun.freeswitch.org"
On the original box in vars.xml "external_sip_port=5090" but in the new it
is 5080.
Do I need to hardcode the external_sip_ip addresses in both boxes?
http://pastebin.freeswitch.org/11600
Thanks Lars
_______________________________________________
FreeSWITCH-users mailing list
[email protected]
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
