On 11/05/12 21:28, Peter wrote: > On 11 May 2012 21:24, Philip Heron<[email protected]> wrote: > >> On 11/05/12 21:10, Peter wrote: >>> I missed that I'm afraid. I was tweaking with a new antenna (which works >>> slightly better). Are you still around? I'll pop on 7.070 if you are. >> >> I'm still there -- I'll try again at 21:30 BST. I'm not sure I have the >> volume levels right though. >> >> > If your radio has an ALC you should set it so that it's not showing any ALC > lights. What I do is set the radio for where FM would be 50w, and feed in > enough audio to just reach 10w. That way the signal stays perfectly linear. > > You won't ever get the radio's full power that way, probably 50-70% is > achievable. But the signal will be clean. If the ALC kicks in it'll likely > cause spatter away from the intended frequency (and thus waste power). > > I'll go at 21:35. Listening on 7.070 USB right now though.
Just finished. That's pretty much what I've done, the volume is set to the ALC is just about a single notch. The power meter isn't showing much though. Listening and recording on 7.070 USB now. -Phil ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
