On Sat, Aug 31, 2013 at 4:21 PM, David Ranch <[email protected]> wrote:
>
> Hello Richard,
>
> Assuming stuff was working before with the same version of code and
> hardware... What kind of device are you using for the PTT signal? A USB
> serial device? I've seen where USB serial devices can get confused when
> asserting say an RTS signal and actually change RTS and CTS at the same
> time. Try resetting the USB device and plugging it back in and see if that
> changes anything.
I tried that and rebooting... It seems like when I click start is when
FreeDV initializes the serial port, when it does it seems to bring both RTS
and DTS up, which is bad because I've got both connected through diodes (to
use +V). Unlike FLDigi, in FreeDV I can only choose RTS or DTS, not both.
Not that I need both but when I try to monitor the serial port with
statserial and click the PTT button, only the selected one is toggled...
Which means one of the two are always up.
Is it possible that FreeDV pay attention to the +V checkboxes for both RTS
and DTS and make sure after initializing the serial port that both are set
to the opposite of the setting until the PTT button is pressed?
Thanks,
Richard
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk
_______________________________________________
Freetel-codec2 mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
