For example, the rule is:
sm1000.elf: $(SM1000_SRCS:.c=.O3.o) src/stm32f4_dac.O3.o \
src/stm32f4_adc.O3.o libstm32f4.a
$(CC) $(CFLAGS) -O3 $^ -o $@ $(LIBPATHS) $(LIBS)
Which says it needs SM1000_SRCS, src/stm32f4_dac.O3.o,
src/stm32f4_adc.O3.o, libstm32f4.a
Working backwards, we find, just above this rule, the dac and adc build
rules which are single files, and then above those you see SM1000_SRCS is
made up of a list of file + CODEC2_SRCS
SM1000_SRCS=\
src/sm1000_main.c \
src/tone.c \
src/sfx.c \
src/sounds.c \
src/morse.c \
src/menu.c \
src/tot.c \
src/sm1000_leds_switches.c \
../src/fifo.c \
src/debugblinky.c \
src/system_stm32f4xx.c \
src/startup_stm32f4xx.s \
src/stm32f4_vrom.c \
src/init.c
Way up you'll find CODEC2_SRCS
CODEC2_SRCS=\
$(CODEC2_SRC)/lpc.c \
$(CODEC2_SRC)/nlp.c \
$(CODEC2_SRC)/postfilter.c \
$(CODEC2_SRC)/sine.c \
$(CODEC2_SRC)/codec2.c \
$(CODEC2_SRC)/kiss_fft.c \
$(CODEC2_SRC)/kiss_fftr.c \
$(CODEC2_SRC)/interp.c \
$(CODEC2_SRC)/lsp.c \
$(CODEC2_SRC)/phase.c \
$(CODEC2_SRC)/quantise.c \
$(CODEC2_SRC)/pack.c \
$(CODEC2_SRC)/codebook.c \
$(CODEC2_SRC)/codebookd.c \
$(CODEC2_SRC)/codebookjvm.c \
$(CODEC2_SRC)/codebookge.c \
$(CODEC2_SRC)/dump.c \
$(CODEC2_SRC)/fdmdv.c \
$(CODEC2_SRC)/freedv_api.c \
$(CODEC2_SRC)/varicode.c \
$(CODEC2_SRC)/golay23.c \
$(CODEC2_SRC)/fsk.c \
$(CODEC2_SRC)/fmfsk.c \
$(CODEC2_SRC)/freedv_vhf_framing.c \
$(CODEC2_SRC)/freedv_data_channel.c
I use an IDE myself, but had to use Makefiles back in the PDP-11 days :-)
On Wed, Sep 7, 2016 at 3:44 AM, <[email protected]> wrote:
> Thanks for that Steve,
>
> That should help heaps.
>
> I'm not up to speed with make files because I usually work in and IDE
> which take care of this.
>
> By being able to just place the files I need in a suitable folder I will
> be able to much eaiser import this code into an IDE where I can begin to
> work on it.
>
> Dave had pointed to the make file but wasn't sure of the specific rule.
>
> Again thank you for your help Steve.
>
>
>
> Cheers
>
> Eric
>
>
>
> On 2016-09-07 10:37, Steve wrote:
>
> The necessary files are in the stm32/Makefile
>
> Look at the rule for sm1000.elf and work backwards. Were it I, I would
> copy the Makefile and edit out the builds you don't need.
>
>
> ------------------------------------------------------------------------------
>
>
> _______________________________________________
> Freetel-codec2 mailing
> [email protected]https://lists.sourceforge.net/lists/listinfo/freetel-codec2
>
>
>
>
> ------------------------------------------------------------
> ------------------
>
> _______________________________________________
> Freetel-codec2 mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freetel-codec2
>
>
------------------------------------------------------------------------------
_______________________________________________
Freetel-codec2 mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
