Thank you for that correction Steve - I have fixed the SM1000 web page. Cheers,
David On 24/09/16 08:19, Steve wrote: > In the blog page: > > <goog_850139705> > http://www.rowetel.com/?page_id=3902 > > It says: > > 1. /11. External Speaker – The SM1000 3.5mm sockets are wired to use > stereo or mono plugs. If you wish to use a mono plug for Ext Spkr > (CN9) remove the jumper J4 on the PCB. This prevents a mono plug > shorting the speaker amplifier output to ground resulting in no > audio. Note the first production SM1000 (Rev D) did not have jumper > J4 and should only be used with a stereo plug./ > > I wonder if it should say: > > 1. 11. External Speaker – The SM1000 3.5mm sockets are wired to use > stereo or mono plugs. If you wish to use a mono plug for Ext Spkr > (*CN8*) remove the jumper *J2 *on the PCB. This prevents a mono plug > shorting the speaker amplifier output to ground resulting in no > audio. Note the first production SM1000 (Rev D) did not have jumper > *J2*and should only be used with a stereo plug. > > J4 is the label on the speaker plug. CN9 seems to be the Ext PTT. > > FYI > > 73 steve > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > ------------------------------------------------------------------------------ _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
