Where is it asking you about a .dfu file? There is no .dfu file.
Just use the binary file. On Tue, Jul 16, 2019 at 2:15 PM George Migliarini <[email protected]> wrote: > > a simple question, where is my file sm1000.dfu I do not have it, where > do I get it from? > > > > Thank you > > > > George AC6RB > > > > From: [email protected] <[email protected]> > Sent: Tuesday, July 16, 2019 11:47 AM > To: [email protected] > Subject: Re: [Freetel-codec2] sm1000 and FreeDV 700D > > > > George, > > > > In order to flash with Windows, you have to install the DFU flashing utility > software. > > > > Please see if this helps you get to a working point and ping me if you have > any issues, and we can walk through it on a Zoom session real easily. > > > > > > Download the DfuSE tool from here, at the bottom of the page > > http://www.st.com/web/en/catalog/tools/FM147/CL1794/SC961/SS1533/PF257916# > > > > All the best….. > > > > > > Walter/K5WH > > > > From: George Migliarini <[email protected]> > Sent: Tuesday, July 16, 2019 10:32 AM > To: [email protected] > Subject: Re: [Freetel-codec2] sm1000 and FreeDV 700D > > > > Try to put the upgrade for SM1000 700D with Windows 10 and I can not do it, > you have someone to help me. I need help. Thank you so much. > > > > 73 and Dx's > > > > George Migliarini > > AC6RB > > Phone: 949-357-8062 > > WhatsApp: +9493578062 > > Videoconferencia: https://appear.in/ic-7300 > > > > From: [email protected] <[email protected]> > Sent: Tuesday, July 16, 2019 8:00 AM > To: [email protected] > Subject: Re: [Freetel-codec2] sm1000 and FreeDV 700D > > > > Gerhard, > > > > Did you hold the PTT button in while turning the sm1000 on? > > > > There are no drivers to be loaded. As it should just come right up once you > power it on in the DFU mode. > > > > > > Walter/K5WH > > > > From: [email protected] <[email protected]> > Sent: Tuesday, July 16, 2019 7:53 AM > To: [email protected] > Subject: Re: [Freetel-codec2] sm1000 and FreeDV 700D > > > > Hi David, > > > > > > Great work! > But I cannot connect the SM1000 to my Win7 PC as the correct USB device is > not detected and no driver loaded. Also automatic search for a driver doesn't > work. Which driver is has to be used? > > 73's > > Gerhard OE3GBB > > > > > > Am 15.07.2019 23:41, schrieb David Rowe: > > Further to the below, the SM1000 page has been updated: > > http://www.rowetel.com/sm1000.html > > and a new manual: > > https://github.com/drowe67/codec2/blob/master/stm32/doc/sm1000_manual.md > > Includes details of how to upgrade to the V2 firmware that includes > FreeDV 700D. > > - David > > > On 09/07/19 07:08, David Rowe wrote: > > For some time now, a group of us, in particular Don, (W7DMR) have been > working on a 700D port to the SM1000: > > http://www.rowetel.com/?p=6725 > > I've been working on the finishing touches, integrating the 700D mode > with Stuart's (VK4MSL) fine menu system. I now have the SM1000 running > 700D (and 1600 and analog modes) on my bench, decoding recordings of > off-air samples. Works well and is stable. Tx works as well. > > Still some polishing to do, but the current code is here: > > https://github.com/drowe67/codec2/pull/42 > > -/- > > We now have around 50 automated tests in the codec 2 repo, covering x86 > and the stm32 port. There's also been some improvements to 700D sync > (+/- 60Hz, more robust and faster on fading channels). > > Cheers, > David > > > > > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
