We kind of solved this problem in the Wenet project: https://github.com/drowe67/codec2/blob/master/octave/fskdemodgui.py
It needs the FSK stats output in JSON format, like what fsk_demod and horus_demod produce. # Call using: # <producer>| ./fsk_demod --cu8 -s --stats=100 2 $SDR_RATE $BAUD_RATE - - 2> >(python fskdemodgui.py --wide) | <consumer> It'll show frequency estimators, FFT output, Eb/N0 estimates, all live. I'm doing similar in a much cleaner manner within a new project here: https://github.com/projecthorus/horus-gui/blob/master/doc/horusgui_screenshot.png However i'm doing the audio FFTs myself, as I wanted a bit more customization in the update rates and resolution. I am overlaying the frequency estimator data, which provides a really nice feedback on what the modem is doing. 73 Mark VK5QI On Fri, Jul 10, 2020 at 12:04 PM David Rowe <[email protected]> wrote: > I've now developed an integrated Rx/fsk demod application, so on the Rx > side you can do something like: > > rtl_fsk -g 1 -f 144490000 - | fsk_put_test_bits - > > However I feel I'm flying blind without some sort of GUI to monitor the > received signal. Something similar to previous Python scripts should do. > > Jereon - now that I'm linking with libcodec2 it's not far off being able > to use your VHF packet system with TAP as well at Tomas' TUN design. > > It's also not far off being a FreeDV receiver, we could pipe the decoded > audio to the Pis sound card. A transceiver could be implemented too, > using rpitx. > > Cheers, > David > > On 9/7/20 7:03 pm, Tomas Härdin wrote: > > Hi > > > > Cool, I'll have to take a closer look at this. > > > > What I suspect may get tricky is the higher-level protocol stuff. It's > > possible to just use straight-up Ethernet and frequency multiplexing to > > avoid some of the problems that WiFi solves. At lower baudrates some > > thought has to be put into header compression I think. > > > > I'm busy with uni things at the moment, hopefully more time should free > > up for this in the coming month or so. > > > > /Tomas > > > > tor 2020-07-09 klockan 18:40 +0930 skrev David Rowe: > >> Further to this I have created a new repo, added instructions, and > >> started integrating the various command line applications together: > >> > >> https://github.com/drowe67/pirip > >> > >> Next step is to link rtl_sdr and the fsk demodulator into one > >> application. > >> > >> - David > >> > >> On 22/6/20 7:39 am, David Rowe wrote: > >>> Some good progress on support for VHF/UHF data using Codec 2 > >>> modems: > >>> > >>> http://www.rowetel.com/?p=7207 > >>> > >>> - David > >>> > >> > >> _______________________________________________ > >> Freetel-codec2 mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > > > > > > _______________________________________________ > > Freetel-codec2 mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > > > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >
_______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
